Get Hardware

From PaparazziUAV
Revision as of 13:27, 7 April 2008 by Dconger (talk | contribs)
Jump to navigation Jump to search

The Paparazzi project began in 2003 with the goal of creating a free and open-source UAV guidance system which could be easily adapted to a wide variety of aircraft for a wide variety of applications. The system has since proved to be extremely successful and Paparazzi-based aircraft have won all top positions in every flight contest in which they competed.

As an open-source project, all source code and hardware plans are freely available on the internet for anyone to produce, use, modify, and redistribute in accordance with the GPL License Agreement which requires only that the open-source nature of the project be maintained by all who redistribute it.

Paparazzi is currently being developed by several universities and a team of enthusiast volunteers from around the world. It is used by private corporations, universities and hobbyists for an ever-increasing number of applications.

Paparazzi UAV Online PPZUAV

Good news. We have your Paparazzi Project PCB and Assembled Paparazzi Hardware at PPZUAV Website: www.onefastdaddy.com
PPZUAV has made available to everyone virtually every Paparazzi Project component including fully assembled autopilots like the Tiny2.11.
PPZUAV uses all major carriers (US Postal, UPS, FedEx, DHL). We also carry cables, and other items you will need to get your Paparazzi Project off the ground.

All Assembled units assembled using pick and place machine and reflow soldered both sides by a very experience professional assembly/fabrication company.The same company then professionally assembles and also offers a guaranteed against assembly defects.

Some of the items we have

Please email sales@ppzuav.com for best prices and any inquiries about anything you need.

NOTE on SHIPPING: Those who wish to use US Postal Service to save costs. USPS does not guarantee International (non USA) shipments greater than 45.00. We are told (by US Postal Service) that liability for > 45.00 USD is put on your countries postal carrier and not reimbursed by USPS. This means any amount > 45.00 you must recover from your Postals Service Provider
We can use any carrier you wish and do not charge more than actual shipping costs. Any over-charge will be refunded to you after shipping. We just want you to receive your order quickly and avoid any issues before shipping. Please select an appropriate carrier based on the value of your order when ordering.

Please check the PPZUAV website often as we expand our product offering.

Mantis Electronics

Mantis Electronics is pleased to offer assembled Tiny 2.11, IR boards, GPS modules, USB-TTL interface boards, 3-Axis I2C/SPI accelerometer boards, and accessories for immediate order.
Our boards are solder paste stencilled, reflow soldered and 100% tested.

  • Tiny 2.11 assembled with LEA-4P and GPS antenna: $250 ($260 with Molex Picoblade connectors)
  • 2-Axis IR board with IR sensors: $75
  • 1-Axis IR board with IR sensors: $55
  • u-blox LEA-4P GPS module: $75
  • USB<->TTL Serial board: $15 (useful for programming and telemetry)
  • 3-Axis I2C/SPI accelerometer board: $35
  • MLX90247 IR sensors: $12
  • Tiny 2.11 bare PCB: $10
  • 2-Axis IR bare PCB: $5
  • 1-Axis IR bare PCB: $5

Current lead time for orders is 3 weeks. USA shipping is $6. International shipping is $15.

Please see our website http://mantiselec.com/paparazzi.html to order.

RCTECHNIX

After numerous requests i am working on supplying all pcb's , parts , gps etc and will be fully supporting the paparazzi projects now and in the future , so please bear with Richard & Myself David (cncbasher), whilst we gather stocks and manufacture pcb's etc , enquirys can be made direct to paparazzi.pcb@rctechnix.com if you wish , a web site is in the process( now up and running see below ) of being put together which will incorporate sales of everything papparazzi , we will even help in getting your own built projects going if you are stuck so long as it's paparazzi based ! too , Bare PCB'S are now available for tiny13 v1.1 , classix v0.99 & dual_ir incl free 1st class postage ,whilst we work on getting the shop up and running if you need bare pcb's , they can be purchased using Paypal from our website http://www.rctechnix.com . we are currently assembling a few for testing and will announce availability shortly of assembled boards and complete kits , along with wiring harness's , usb lead's , gps , antennas & zigbee modules etc.

Although the website is new , we hope to have stocks of almost everything you will need , and other rc supplies too .

Mass Production of Tiny V2.11

To be cost effective, 3 metres square of PCB will be produce & tested! ~ 1000pcs can be made

Each Bare PCB is USD $4 each
Over 10's USD $3
Over 50's USD $2

Next day is ready for shipping!

pls send ur interested to jeff@halfbase.com

Retrieved from "http://wiki.paparazziuav.org/w/index.php?title=Get_Hardware&oldid=3518"