AR Drone 2/Motor driver
Revision as of 01:52, 13 December 2012 by Vincent van Hoek (talk | contribs)
Starting off with the project we first tried searching what had allready been done for AR.Drone1 and we found a very good source in the [Perquin blog|http://blog.perquin.com/blog/2011/06/] explaining how to control the motors. We soon noticed that the device name is different on the AR.Drone2. We found out by using dmesg and trace functions that the devices are as follows:
- /dev/ttyO0 : motor
After finding out what the correct device was, we could simply change the device name in the driver created by hugo[1]. This gave us a working motor driver.