Explorer

The Explorer is a rotorcraft.
It is used to test :

• control loops such as PID and INDI
• simultaneous datalinks such as Xbee and Wifibroadcast
• vision algorithm

The Explorer frame is 3Dprinted
Explorer/3DPrinted

The aircraft flies an Apogee or a Tawaki autopilot board.
Explorer/PPRZ

The RaspberryPi provides: - a camera link - an additional communication link - an easy way to run computation tasks.

There are two RaspberryPi :
- on board, as a companion board to the autopilot
- on ground, as an interface to the companion board

The RPI Zero and RPI 3B can be used in this aircraft as they provided at least one UART and one USB
Explorer/RaspberryPi

The equipments connected to the autopilot board are :

• Dshot 4in1 ESC board
• GPS (D-GPS) Explorer/RTK
• Xbee
• Leds Explorer/Leds
• Radio control
• Servo Explorer/Servo

The equipments connected to the companion board are :

• Camera
• External wifi