Difference between revisions of "Lisa"
Jump to navigation
Jump to search
| Line 5: | Line 5: | ||
The hardware is still in development. The current CAD files are maintained in savannah svn in the paparazzi4/trunk/hw/lisa directory. | The hardware is still in development. The current CAD files are maintained in savannah svn in the paparazzi4/trunk/hw/lisa directory. | ||
Software development is done on a Overo/Summit + Olimex STM32-H103 dev board | Software development is done on a Overo/Summit + Olimex STM32-H103 dev board | ||
[[Image:lisa_proto.jpg]] | [[Image:lisa_proto.jpg|thumb]] | ||
== Software == | == Software == | ||
Revision as of 06:40, 9 October 2009
Lisa is a STM32/Overo board designed to run Paparazzi
Hardware
The hardware is still in development. The current CAD files are maintained in savannah svn in the paparazzi4/trunk/hw/lisa directory. Software development is done on a Overo/Summit + Olimex STM32-H103 dev board
Software
STM32 toolchain
You can use the summon-arm-toolchain script to build the required toolchain. If you want the default values of the Paparazzi Makefile to work, you should set
PREFIX=/opt/stm32/toolchain/arm-elf
Open Embedded
Open Embedded is the linux distribution used on the overo. You can follow the instructions on gumstix's website to build a complete cross development environment. Paparazzi's Makefile will default to look for it in /overo-oe