Difference between revisions of "Previous Infrared Sensors"
Jump to navigation
Jump to search
| Line 52: | Line 52: | ||
[[Image:Z_Sensor.jpg]] | [[Image:Z_Sensor.jpg]] | ||
With the above '''"Sensor Orientation"'''s IR1_SIGN, IR2_SIGN, and TOP_SIGN values ended up "1" in Airframe file. For more information look in ~/paparazzi3/sw/airborne/infrared.c file on your system. | With the above '''"Sensor Orientation"'''s IR1_SIGN, IR2_SIGN, and TOP_SIGN values ended up "1" in Airframe file. For more information look in ( ~/paparazzi3/sw/airborne/infrared.c ) file on your system. | ||
Revision as of 22:16, 21 February 2009
Dual Axis Board
Pinout
Component Side View
| Pin # | Name | Notes | Suggested Color |
|---|---|---|---|
| 1 | IR2 | IR Signal Output Axis 2 | Grey |
| 2 | GND | Ground | Black |
| 3 | VCC | +3.3v Power Supply | Red |
| 4 | IR1 | IR Signal Output Axis 1 | Braun |
Sensor Orientation
Align arrows FWD and AFT on fuselage, SM components up, Connector down. Either arrow can be forward. Follow Wiki airframe configuration file instructions.
Single Axis Board
Pinout
Component Side View
| Pin # | Name | Notes | Suggested Color |
|---|---|---|---|
| 1 | IR | IR Signal Output | Purple |
| 2 | VCC | +3.3v Power Supply | Red |
| 3 | GND | Ground | Black |
Sensor Orientation
With the above "Sensor Orientation"s IR1_SIGN, IR2_SIGN, and TOP_SIGN values ended up "1" in Airframe file. For more information look in ( ~/paparazzi3/sw/airborne/infrared.c ) file on your system.