Difference between revisions of "Media"
Jump to navigation
Jump to search
Line 8: | Line 8: | ||
</small> | </small> | ||
* [http://diydrones.com/profiles/blog/show?id=705844%3ABlogPost%3A29982 Interview: Martin Müller and the Paparazzi Project (now less DIY!)] - March 25, 2008 | * [http://diydrones.com/profiles/blog/show?id=705844%3ABlogPost%3A29982 DIY DRONES: Interview: Martin Müller and the Paparazzi Project (now less DIY!)] - March 25, 2008 | ||
*:<small>DIY DRONES has been following the Paparazzi autopilot project with interest for several years. It's a European open source technology initiative that has created both thermopile (infrared sensor) and gyro-based autopilot hardware, along with quite sophisticated software to run it… | *:<small>DIY DRONES has been following the Paparazzi autopilot project with interest for several years. It's a European open source technology initiative that has created both thermopile (infrared sensor) and gyro-based autopilot hardware, along with quite sophisticated software to run it… | ||
</small> | </small> |
Revision as of 08:12, 11 June 2008
Paparazzi in the News
|
Design Reports
Manuals
|
Other Sites of Interest
- "Design, Fabrication and Initial Results of a 2g Autonomous Glider"
(900K, PDF) - July 2007- Utilizing the core technologies of emerging microrobotic structures, the rapid design and prototyping of a passive micro air vehicle with the final goal of locating an audio source while avoiding hazardous obstacles is presented. The airfoil and control surfaces are optimized empirically to maximize lift and maneuverability while minimizing drag. Bimorph piezoelectric bending cantilevers actuate the control surfaces. Since such actuators require high voltages, an efficient boost circuit is presented along with appropriate high voltage electronics. To locate audio sources, a pair of acoustic sensors is designed and prototyped using a phase detection algorithm while a custom optic flow sensor is developed to avoid obstacles and give estimates of object distances and velocities. Finally, each subsystem is demonstrated and the complete glider is integrated to demonstrate initial open loop control performance.