Difference between revisions of "Tunnel"
Jump to navigation
Jump to search
| Line 20: | Line 20: | ||
Starting software at 0x00004000 | Starting software at 0x00004000 | ||
</pre> | </pre> | ||
[http://paparazzi.enac.fr/wiki/index.php/Tiny_v2#Programming BACK] | |||
Revision as of 18:24, 20 April 2008
Required Cables:
- USB cable
- USB to 8-pin Molex Picoblade connector adapter cable
Steps:
- Connect USB Cable + 8-pin Molex adapter to USB on your laptop
- Connect 8-pin Molex Connector on the Adapter cable to "usb" on Tiny2.11
- Power on Tiny2.11
- Enter this command in a terminal: make upload_bl PROC=GENERIC
Success will show this in the last lines of the terminal window
Found USB device BootROM code: 2.12 Part ID: 0x0402FF25 (LPC2148, 512k Flash, 32k+8k RAM) BootLoader version: 1.3 # Starting software at 0x00004000