Difference between revisions of "SUMO/rc transmitter"
(Created page with "We chose the Futaba 2.4GHz FASST system to control the SUMO. We have used classic Graupner/JR transmitters together with Futaba HFM12-x transmitter modules and the Futaba T6EX, T…") |
(add T7C programming) |
||
| Line 26: | Line 26: | ||
Use the radio/t7c.xml radio file for configuration (for a Futaba R6107SP receiver). | Use the radio/t7c.xml radio file for configuration (for a Futaba R6107SP receiver). | ||
=== Programming the 5th channel of the T7C for Paparazzi mode === | |||
turn on transmitter | |||
[[Image:T7c_mode_01.jpg|400px]] | |||
long press Mode/Page button | |||
[[Image:T7c_mode_02.jpg|400px]] | |||
press Cursor/Down 2x to get to PARAMETR | |||
[[Image:T7c_mode_03.jpg|400px]] | |||
press big round Multi/Rotation button | |||
[[Image:T7c_mode_04.jpg|400px]] | |||
press Cursor/Down 2x to SCH-K5 (channel 5) | |||
[[Image:T7c_mode_05.jpg|400px]] | |||
turn big round Multi/Rotation button until E (3-way switch) appears | |||
[[Image:T7c_mode_06.jpg|400px]] | |||
press End 2x to leave | |||
Revision as of 12:42, 28 January 2014
We chose the Futaba 2.4GHz FASST system to control the SUMO. We have used classic Graupner/JR transmitters together with Futaba HFM12-x transmitter modules and the Futaba T6EX, T7C and T8FG transmitters. The T6EX is not really recommended as you might need to modify it to have a 3 position switch. With the T6EX we also had seen issues because of reduced transmission power at low temperatures (-28°C).
T7C
T8FG
Choose your personal stick mode for the Futaba T7C or T8FG and do not reverse channels. Program the transmitter to have a 3-position switch (for manual/auto1/auto2) to appear on channel 5.
The channels at a Futaba R6107SP should then be
1 Roll 2 Pitch 3 Throttle 4 Yaw 5 Autopilot Mode (M/A1/A2)
Use the radio/t7c.xml radio file for configuration (for a Futaba R6107SP receiver).
Programming the 5th channel of the T7C for Paparazzi mode
turn on transmitter
long press Mode/Page button
press Cursor/Down 2x to get to PARAMETR
press big round Multi/Rotation button
press Cursor/Down 2x to SCH-K5 (channel 5)
turn big round Multi/Rotation button until E (3-way switch) appears
press End 2x to leave