Difference between revisions of "User/LisaL"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
=Getting started= | =Getting started= | ||
* Install Gnu/Linux Ubuntu lucid lynx ( 10.04) and the paparazzi-dev and paparazzi-stm32 packages ( see somewhere in the wiki ). | |||
* Connect power to the board. The board accepts input voltage from 6V to 18V. The power connector is from JST and known in the rc world as a BEC connector | * Connect power to the board. The board accepts input voltage from 6V to 18V. The power connector is from JST and known in the rc world as a BEC connector | ||
* Connect a mini USB cable in the mini USB connector. This should give you two USB devices. The first one ( usualy /dev/ttyUSB0) is the console for the Overo, the second one is the JTAG for the STM32 | * Connect a mini USB cable in the mini USB connector. This should give you two USB devices. The first one ( usualy /dev/ttyUSB0) is the console for the Overo, the second one is the JTAG for the STM32 | ||
Revision as of 06:12, 6 August 2010
This page describe how to use Lisa/L from a user point of view
Getting started
- Install Gnu/Linux Ubuntu lucid lynx ( 10.04) and the paparazzi-dev and paparazzi-stm32 packages ( see somewhere in the wiki ).
- Connect power to the board. The board accepts input voltage from 6V to 18V. The power connector is from JST and known in the rc world as a BEC connector
- Connect a mini USB cable in the mini USB connector. This should give you two USB devices. The first one ( usualy /dev/ttyUSB0) is the console for the Overo, the second one is the JTAG for the STM32