Difference between revisions of "LisaOveroImage"
Jump to navigation
Jump to search
| Line 8: | Line 8: | ||
## 2.6.33.5-rt23 preempt-rt patch | ## 2.6.33.5-rt23 preempt-rt patch | ||
* Make sure you have bitbake and build-essential installed | * Make sure you have bitbake and build-essential installed: | ||
apt-get install bitbake build-essential | apt-get install bitbake build-essential | ||
* Make an overo-oe directory in your home directory, cd into it | * Make an overo-oe directory in your home directory, cd into it: | ||
mkdir ~/overo-oe | mkdir ~/overo-oe | ||
cd ~/overo-oe | cd ~/overo-oe | ||
* Clone Allen's openmebedded tree | * Clone Allen's openmebedded tree: | ||
git clone git@git://gitorious.org:linux-omap3/openembedded.git | git clone git@git://gitorious.org:linux-omap3/openembedded.git | ||
* Copy build profile into ~/overo-oe: | * Copy build profile into ~/overo-oe, source it: | ||
cp org.openembedded.org/contrib/jei/build . | cp org.openembedded.org/contrib/jei/build . | ||
source ~/overo-oe/build/profile | source ~/overo-oe/build/profile | ||
* Use bitbake to build the image | * Use bitbake to build the image: | ||
bitbake omap3-lisa-image | bitbake omap3-lisa-image | ||
Revision as of 15:41, 6 July 2010
Building an Overo image for Lisa with Open Embedded
The goal is to use openmbedded to build an image for the overo with the bits needed for Lisa. Currently this includes
- libevent
- linux kernel 2.6.33.5-rt23 (maintained at git://gitorious.org/linux-omap3/linux-omap3.git)
- based on gumstix-oe from (git://www.sakoman.com/git/linux-omap-2.6.git)
- antoine's patch for spi device node on overo
- 2.6.33.5-rt23 preempt-rt patch
- Make sure you have bitbake and build-essential installed:
apt-get install bitbake build-essential
- Make an overo-oe directory in your home directory, cd into it:
mkdir ~/overo-oe cd ~/overo-oe
- Clone Allen's openmebedded tree:
git clone git@git://gitorious.org:linux-omap3/openembedded.git
- Copy build profile into ~/overo-oe, source it:
cp org.openembedded.org/contrib/jei/build . source ~/overo-oe/build/profile
- Use bitbake to build the image:
bitbake omap3-lisa-image