Difference between revisions of "LisaOveroImage"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
==Building an Overo image for Lisa with Open Embedded== | ==Building an Overo image for Lisa with Open Embedded== | ||
The goal is to use openmbedded to build an image for the overo with the bits needed for Lisa. Currently this includes | |||
# libevent | |||
# linux kernel 2.6.33.5-rt23 (maintained at git://gitorious.org/linux-omap3/linux-omap3.git) | |||
## based on gumstix-oe from (git://www.sakoman.com/git/linux-omap-2.6.git) | |||
## antoine's patch for spi device node on overo | |||
## 2.6.33.5-rt23 preempt-rt patch | |||
* Make sure you have bitbake and build-essential installed. | * Make sure you have bitbake and build-essential installed. | ||
Revision as of 15:39, 6 July 2010
Building an Overo image for Lisa with Open Embedded
The goal is to use openmbedded to build an image for the overo with the bits needed for Lisa. Currently this includes
- libevent
- linux kernel 2.6.33.5-rt23 (maintained at git://gitorious.org/linux-omap3/linux-omap3.git)
- based on gumstix-oe from (git://www.sakoman.com/git/linux-omap-2.6.git)
- antoine's patch for spi device node on overo
- 2.6.33.5-rt23 preempt-rt patch
- Make sure you have bitbake and build-essential installed.
apt-get install bitbake build-essential
- Make an overo-oe directory in your home directory, cd into it
mkdir ~/overo-oe cd ~/overo-oe
- Clone Allen's openmebedded tree
git clone git@git://gitorious.org:linux-omap3/openembedded.git
- Copy build profile into ~/overo-oe:
cp org.openembedded.org/contrib/jei/build . source ~/overo-oe/build/profile
- Use bitbake to build the image
bitbake omap3-lisa-image