Difference between revisions of "FunJet"
Jump to navigation
Jump to search
| Line 101: | Line 101: | ||
== Funjet Back Plate Construction == | == Funjet Back Plate Construction == | ||
{| | {| | ||
|[[Image: | |[[Image:Funjet_Back_Plate_Components.jpg|thumb|left|Funjet back plate construction components]] | ||
|} | |} | ||
| Line 115: | Line 115: | ||
{| | {| | ||
|[[Image: | |[[Image:Funjet_Back_Plate_Fitted.jpg|thumb|Funjet back plate fitted]] | ||
|[[Image:Tiny_v2_1_Funjet.jpg|thumb|Tiny v2.1 in a Funjet]] | |[[Image:Tiny_v2_1_Funjet.jpg|thumb|Tiny v2.1 in a Funjet]] | ||
|} | |} | ||
Revision as of 01:04, 24 May 2008
<< Back to Airframes
|
The MultiPlex FunJet is an electric pusher-prop jet made of very durable Elapor Particle Foam Construction. It offers plenty of room internally for avionics in an attractive package. |
Features
- Suggested Retail Price of $65 USD
- Elapor Particle Foam construction
- Assembles in minutes with only Medium CA glue
- Fiberglass Wing Spar
- Moderately priced
- Detachable canopy for access to internals
- Plastic Motor Mount
- Wide flight speed envelope (slow without stalling, through fast)
Specifications
- Wingspan: 31.29" (795mm)
- Wing Area: 232 sq in (15 sq dm)
- Weight: 21oz (620g) _all up_
- Weight w/o powerplant (for estimation): 330g
- Length: 29.52" (750mm)
- Airfoils: Airfoil: Semi-symmetrical, mid wing at the fuselage sides
Payload Area
- Fuselage is 1.60" (40.6mm) wide x 20" long
Recommended Setups
Manufacturer Recommendation
Remember this is a hot sport plane so the manufacturers recommendation reflects typical desired performance and may not be the best match for UAV operations.
- Motor: Himax HB2815-3000 Brushless Motor
- Battery: 3S1P 2100-3200mah LiPo
- Servos: 2 Nano sized (HS-55)
Group Member Setups
Martin
- Motor: AXI 2212/26
- Battery: 3S1P 2100mAh LiPo
- Prop: 9x6
Matthew Currie
- Motor: AXI 2212/26
- Battery: LiPower Lites 3S1P 2100mAh 18C LiPo
- Prop: APC 9x6E (checked to draw ~ 11.5A)
- Receiver: Berg 4L
- Servos: 2x Hitec HS-55
Servos
Multiplex calls for 2 Hitec HS-55 or 2 HS-65 servos
Hitec HS-55
- MSRP: $13 USD
- Torque: 13/16 oz/in @ 4.8/6.0v
- Speed: 0.09/0.08 seconds/ 60deg @ 4.8/6.0v
- Weight: 0.29 oz (7.8g)
- Size: 0.9 x 0.46 x 0.95"
Hitec HS-65HB
- MSRP:
- Motor Type: 3 Pole Ferrite
- Bearing Type: Top Ball Bearing
- Torque 4.8/6.0v: 22 / 26 oz (1.6 / 1.9 kg.)
- Speed 4.8/6.0v: 0.16 / 0.13 second
- Size: 0.9"x 0.5"x 0.9" (24 x 12 x 24m)
- Weigh : 0.39oz. 11.2 g.
Recommended Motors
Himax HB2815-3000 Brushless Motor
- MSRP $69.95 USD
- Dimensions: 27mm x 38mm
- Weight: 86g
- KV: 3000
- Max Amps: 30A
- Max Watts: 275W
Funjet Back Plate Construction
- A suitable precursor for the back plate is 5mmx75mmx75mm balsa sanwiched by 1mmx75mmx75mm plywood. The laminating adhesive used was PVA glue. The sandwich was left to dry overnight clamped by similar size wooden plates in a vice.
- An outline of The 7mm elapor profile, cut from the back of the Funjet canopy, is drawn in a CAD/CAM program.
- download File:Funjet Back Plate CADopia.pdf
- A laser cutting firm transferred this outline to CorelDraw and cut an acrylic (Perspex) template.
- The balsa/plywood sandwich was attached by double sided tape to the acrylic template and the correct outline achieved by routing around the acrylic border.
- The fitted plate looks remarkably similar to that displayed in the image on the right found on the main page of the wiki.
Online Discussion on FunJet topics
- Modifying the motor cowling to increase airflow
- Adding prop spacers to move prop further back
- Mounting a MicroDan 2505 Brushless Outrunner
Photos
Misc Notes
- Multiplex FunJet Instruction Manual - English
- Multiplex FunJet Instruction Manual - Original Multilanguage
- Painting Elapor should be primed [primer]
- Fiberglass wing spar: 22.5" (571mm) x .25" (6.35mm)