Difference between revisions of "Explorer"
Jump to navigation
Jump to search
| Line 10: | Line 10: | ||
- on ground, as an interface to the compagnon board, and connected to the ground station to provide additional communication task.<br /> | - on ground, as an interface to the compagnon board, and connected to the ground station to provide additional communication task.<br /> | ||
The RPI Zero and RPI 3B | The RPI Zero and RPI 3B can be used in this aircraft as they provided at least one UART and one USB <br /> | ||
[[Explorer/RaspberryPi]] | [[Explorer/RaspberryPi]] | ||
Revision as of 01:02, 28 June 2020
The Explorer is a rotorcraft.
It is used to test
- control loops such as PID and INDI
- simultaneous datalinks such as Xbee and Wifibroadcast
- vision algorithm
The aircraft flies an Apogee or a Tawaki autopilot board.
There are two RaspberryPi
- on board, as a compagnon board, connected to the autopilot to provide additional communication and processing task.
- on ground, as an interface to the compagnon board, and connected to the ground station to provide additional communication task.
The RPI Zero and RPI 3B can be used in this aircraft as they provided at least one UART and one USB
Explorer/RaspberryPi
Additional equipements connected to the autopilot board are :
- Dshot 4in1 ESC board
- GPS (D-GPS) Explorer/RTK
- Xbee
- Leds
- Radio control
- Servo
Additional equipements connected to the compagnon board are :
- Camera
- External wifi