Difference between revisions of "DGPS"

From PaparazziUAV
Jump to navigation Jump to search
Line 1: Line 1:
THe Differential GPS present here is based on the Ublox chip M8P.  
The Differential GPS present here is based on the Ublox chip M8P. There are two types of Ublox M8P:
There are two type of Ublox M8P:
* NEO-M8P-0: acting as the rover (mobile)
- NEO-M8P-0: acting as the rover (mobile)
* NEO-M8P-2: acting as the rover (mobile) or as the ground station
- NEO-M8P-2: acting as the rover (mobile) or as the ground station
 
The NEO-M8P-2 acting ground station should know its position. This can be done by locating the ground antenna to a know position and initializing the ublox to this position, or programming the ublox to send its estimate converging position after a given time and giver precision
 
The as a ground station acquire observation data from its fixed position and output these data to the NEO-M8P rover (mobile).
 
 
 
can be initialized with a know position, or programed to converge within a given time and precision.


The NEO-M8P-2 acting as a ground station acquire observation data from its fixed position and output these data to the NEO-M8P rover (mobile).
The ground station can be initialized with a know position, or programed to converge within a given time and precision.
This way the ground station transmits also its position.
This way the ground station transmits also its position.
The DGPS use three messages typed from RTCM3 standard protocol:
The DGPS use three messages typed from RTCM3 standard protocol:

Revision as of 10:25, 26 February 2017

The Differential GPS present here is based on the Ublox chip M8P. There are two types of Ublox M8P:

  • NEO-M8P-0: acting as the rover (mobile)
  • NEO-M8P-2: acting as the rover (mobile) or as the ground station

The NEO-M8P-2 acting ground station should know its position. This can be done by locating the ground antenna to a know position and initializing the ublox to this position, or programming the ublox to send its estimate converging position after a given time and giver precision

The as a ground station acquire observation data from its fixed position and output these data to the NEO-M8P rover (mobile).


can be initialized with a know position, or programed to converge within a given time and precision.

This way the ground station transmits also its position. The DGPS use three messages typed from RTCM3 standard protocol: - RTCM3.2 1005 : Ground station position - RTCM3.2 1077 : GPS observation data - RTCM3.2 1087 : Beidou observation data


as well as its position. The ground station The NEO-M8P acting as a rover (mobile) computes the position of the ground station acquire observation data from its mobile position and These data are transmitted as new messages within the paparazzi telemetry. The