Difference between revisions of "Tiny Assembly"
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
[[image:SOLDERPASTE_TOOMUCH.jpg]] | [[image:SOLDERPASTE_TOOMUCH.jpg]] | ||
this is the result after reflowing | |||
[[image:Solderpaste_resulttoomuch.jpg]] | |||
Revision as of 19:10, 29 January 2007
Solder Paste Usage
Solder paste can easily become your secret weapon against the difficult placing of the fine-pitch components in use in this project. The most crucial parameter you can control is how much solder paste is used. If too much is used (even 1/10 of a gram too much), you will be left removing many solder bridges between pins and pads manually. Alternatively if too little is used you will be left individually soldering pins.
Below is an example of too much
this is the result after reflowing
