Difference between revisions of "Udev"
Jump to navigation
Jump to search
(Created page with "You can get the serial number of your FTDI usb/serial converter connected to your xbee via udevadm info --query=all --attribute-walk --name=/dev/ttyUSB0 and looking for the line…") |
|||
| Line 17: | Line 17: | ||
To actually retrigger without having to re-plug it: | To actually retrigger without having to re-plug it: | ||
sudo udevadm trigger | sudo udevadm trigger | ||
== example udev rule for the floss-jtag serial == | |||
SUBSYSTEM=="tty", ATTRS{interface}=="FLOSS-JTAG", ATTRS{bInterfaceNumber}=="01", SYMLINK+="jtag-serial" | |||
Revision as of 11:20, 11 March 2012
You can get the serial number of your FTDI usb/serial converter connected to your xbee via
udevadm info --query=all --attribute-walk --name=/dev/ttyUSB0
and looking for the lines
ATTRS{manufacturer}=="FTDI"
ATTRS{product}=="FT232R USB UART"
ATTRS{serial}=="A80081ej"
where the last one would be your serial you need to write into the rules file, e.g.
# your own XBee ground modem with FTDI USB adapter (adapt serial number)
SUBSYSTEM=="tty", ATTRS{product}=="FT232R USB UART", ATTRS{serial}=="A80081ej", SYMLINK+="paparazzi/xbee", GOTO="tty_FTDI232_end"
To see what udev rules would match (It may show incorrect results, because
some values may be different, or not available at a simulation run.)
udevadm test --action=add $(udevadm info --query=path --name /dev/ttyUSB0)
To actually retrigger without having to re-plug it:
sudo udevadm trigger
example udev rule for the floss-jtag serial
SUBSYSTEM=="tty", ATTRS{interface}=="FLOSS-JTAG", ATTRS{bInterfaceNumber}=="01", SYMLINK+="jtag-serial"