Difference between revisions of "Gyroscopes"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
[[Image: | == Paparazzi ADXR Gyro board == | ||
[http://cvs.savannah.gnu.org/viewvc/paparazzi/paparazzi3/hw/sensors/ CVS] | |||
== Sparkfun Breakout Board == | |||
Example Gyroscope for MicroJet: this is the 150 degrees per second sensor from [http://www.sparkfun.com sparkfun]. The sensor is a 5 volt sensor while the tiny ADC is 3.3 volts. Using a resistor bridge of say 220k on 330k gives a nice 5 -> 3 volt conversion of the output. Ideally the gyro should be fed with very smooth stable 5V but as it wil not be integrated but just used to help the slow thermopiles, the 5 Volts from the servos-receiver also work. | |||
[[Image:ModifiedSparkfunCdw.jpg|thumb|Modified ADXR Sparkfun breakout board]] | |||
<br /> | |||
[[User:Cdewagter|cdewagter]] 12:59, 25 January 2008 (CET) | |||
Revision as of 04:59, 25 January 2008
Paparazzi ADXR Gyro board
Sparkfun Breakout Board
Example Gyroscope for MicroJet: this is the 150 degrees per second sensor from sparkfun. The sensor is a 5 volt sensor while the tiny ADC is 3.3 volts. Using a resistor bridge of say 220k on 330k gives a nice 5 -> 3 volt conversion of the output. Ideally the gyro should be fed with very smooth stable 5V but as it wil not be integrated but just used to help the slow thermopiles, the 5 Volts from the servos-receiver also work.
cdewagter 12:59, 25 January 2008 (CET)