Difference between revisions of "Tiny v1.1"

From PaparazziUAV
Jump to navigation Jump to search
(Redirecting to Tiny/v1.1)
 
(42 intermediate revisions by 12 users not shown)
Line 1: Line 1:
The Tiny autopilot was designed with an end user application in mind.
#REDIRECT [[Tiny/v1.1]]
 
== Features ==
 
* Single LPC2148 MCU
* 8 Analog input channels 0V - 3.3V
* 1 3.3V TTL UART (5V tolerant)
* 7 PWM outputs
* 1 R/C receiver PWM frame input
* 1 [http://en.wikipedia.org/wiki/Serial_Peripheral_Interface SPI] bus
* 1 [http://en.wikipedia.org/wiki/I2c I<sup>2</sup>C] bus
* 1 USB (client)
* Integrated GPS receiver and patch antenna (4Hz update)
* 5V/2A switching power supply & 3.3V linear regulator
* 2 LEDs (status display)
* 1 button (initiate launch)
* 25 grams
* 63 x 35mm
 
The Tiny autopilot uses a single Philips LPC2148 ARM7 based microcontroller.
The [http://www.arm.com/products/CPUs/families/ARM7Family.html ARM7] is a low-power 32-bit RISC processor core and the [http://www.standardics.philips.com/products/lpc2000/ Philips LPC2148] has 512KB on-chip Flash ROM, 40KB RAM and can be clocked at 60MHz.
 
Although critical control code such as the R/C interface and servo output are well segregated in Paparazzi software and well protected from interference from flaws in the stability/navigation/comm/payload code, great care must be taken when experimenting with new software as some errors can cause a the processor to halt or stall for extended periods causing total loss of control.  The dual processor [[Classix]] addresses this risk by runnning critical code on a separate independent processor.
 
The schematics are available from the [http://cvs.savannah.nongnu.org/viewcvs/paparazzi3/hw/controller/?root=paparazzi CVS repository].
<br>
[[Image:tiny_proto1_top_small.jpg]]
[[Image:tiny_proto1_bot_small.jpg]]
 
== Architecture ==
 
[[Image:Tiny_v099_Architecture.gif]]
 
== Pinout ==
'''(Tiny13 v1.1)'''
 
[[Image:Tiny13_v1_1_pinout.gif]]
 
Wire colors:
* USB- : white
* USB+ : green
* LPC_SSEL : orange
 
'''SERIAL 1'''
 
1 GND
2 +3.3V
3 SDA0
4 SCL0
5 P0.14
6 RESET
7 RXD_0
8 TXD_0
 
'''SERIAL 2'''
 
1 GND
2 3.3V
3 SCK
4 MISO
5 MOSI
6 SSEL
7 INT
8 USB+
9 USB-
10 P0.23
 
'''RC'''
 
1 GND
2 5V
3 PPM_IN
4 NC
5 NC
 
'''ANALOG'''
 
1 GND
2 3.3V
3 ADC_0
4 ADC_1
5 ADC_2
6 ADC_3
7 ADC_4
8 ADC_5
9 ADC_6
10 ADC_7
 
== Bill of Materials (BOM) ==
 
Please note that there are differences between 0.9, 0.99, and 1.1.  Choose the version that matches your hardware.
 
=== Tiny 1.1 BOM ===
 
[http://www.recherche.enac.fr/paparazzi/wiki/images/b/b1/1.1_bom.zip 1.1_bom.zip]
 
=== Tiny 0.99 BOM ===
<small>
{|
|-valign="top"
|Qty ||Value||Device||Parts||Manufacturer||PN||distr PN
|-valign="top"
||7 || - ||53047-03 ||CAMERA, RC_RX, S0, S1, S3, S4, S5 ||Molex ||53047-0310 ||DK WM1732-ND
|-valign="top"
||1 || - ||53047-04 ||VIDEO_TX ||Molex ||53047-0410 ||DK WM1733-ND
|-valign="top"
||1 || - ||53047-08 ||SERIAL_1 ||Molex ||53047-0810 ||DK WM1737-ND
|-valign="top"
||2 || - ||53047-10 ||ANALOG, SERIAL_2 ||Molex ||53047-1010 ||DK WM1739-ND
|-valign="top"
||1 ||FUTABA_BEND ||FUTABA_BEND ||CON_ESC || - || - || -
|-valign="top"
||2 ||LEDCHIP ||LED0805 ||LED1, LED2 ||Kingbright ||APT2012EC ||MO 604-APT2012EC
|-valign="top"
||1 ||B3S ||B3S ||SW1 || OMRON ELECTRONICS || B3S-1002 || RS 183-717
|-valign="top"
||1 ||0.47uH ||L-EUL2012C ||L2 || WURTH ELEKTRONIK || 74479032 || RS 308-8564
|-valign="top"
||1 ||15uH ||WE_PD ||L1 ||Pulse ||P1168.153T ||MO 673-P1168.153T
|-valign="top"
||2 ||33R ||R-EU_R1005 ||R9, R10 ||Yageo ||RC0402JR-0733L ||DK 311-33JRCT-ND
|-valign="top"
||1 ||150R ||R-EU_R1005 ||R12 ||Yageo ||RC0402JR-07150L ||DK 311-150JRCT-ND
|-valign="top"
||3 ||1K ||R-EU_R1005 ||R2, R3, R8 ||Yageo ||RC0402JR-071KL ||DK 311-1.0KJRCT-ND
|-valign="top"
||1 ||1.5K ||R-EU_R1005 ||R11 ||Yageo ||RC0402JR-071K5L ||DK 311-1.5KJRCT-ND
|-valign="top"
||2 ||3.3K ||R-EU_R1005 ||R6, R15 ||Yageo ||RC0402JR-073K3L ||DK 311-3.3KJRCT-ND
|-valign="top"
||1 ||4.7K ||R-EU_R1005 ||R1 ||Yageo ||RC0402JR-074K7L ||DK 311-4.7KJRCT-ND
|-valign="top"
||7 ||10K ||R-EU_R1005 ||R4, R5, R13, R14, R16, R17, R18 ||Yageo ||RC0402JR-0710KL ||DK 311-10KJRCT-ND
|-valign="top"
||2 ||12K ||R-EU_R1005 ||R103, R105 ||Yageo ||RC0402JR-0712KL ||DK 311-12KJRCT-ND
|-valign="top"
||1 ||15K ||R-EU_R1005 ||R7 ||Yageo ||RC0402JR-0715KL ||DK 311-15KJRCT-ND
|-valign="top"
||2 ||56K ||R-EU_R1005 ||R102, R104 ||Yageo ||RC0402JR-0756KL ||DK 311-56KJRCT-ND
|-valign="top"
||1 ||100K ||R-EU_R1005 ||R101 ||Yageo ||RC0402JR-07100KL ||DK 311-100KJRCT-ND
|-valign="top"
||3 ||18pF ||C-EUC0402K ||C3, C7, C10 ||TDK ||C1005C0G1H180J ||DK 445-1238-1-ND
|-valign="top"
||2 ||22pF ||C-EUC0402K ||C8_1, C9_1 ||Yageo ||CC0402JRNPO9BN220 ||DK 311-1018-1-ND
|-valign="top"
||1 ||100pF ||C-EUC0402K ||C103 ||Kemet ||C0402C101J3GACTU ||DK 399-1022-1-ND
|-valign="top"
||1 ||220pF ||C-EUC0402K ||C102 ||Kemet ||C0402C221K5RACTU ||DK 399-1030-1-ND
|-valign="top"
||1 ||220pF/50V ||C-EUC1206K ||C4 ||Yageo ||CC1206KRX7R9BB221 ||DK 311-1164-1-ND
|-valign="top"
||1 ||1nF ||C-EUC0402K ||C104 ||Kemet ||C0402C102K3RACTU ||DK 399-1031-1-ND
|-valign="top"
||1 ||3.3nF ||C-EUC0402K ||C101 ||Kemet ||C0402C332K5RACTU ||DK 399-3070-1-ND
|-valign="top"
||1 ||22nF/50V ||C-EUC1206K ||C6 ||Yageo ||CC1206KRX7R9BB222 ||DK 311-1176-1-ND
|-valign="top"
||8 ||100nF ||C-EUC0402K ||C1_1, C2, C3_1, C4_1, C5_1, C6_1, C7_1, C106 ||Kemet ||C0402C104K8PACTU ||DK 99-3027-1-ND
|-valign="top"
||3 ||100nF ||C-EUC0603 ||C8, C9, C21 ||Kemet ||C0603C104J4RACTU ||DK 399-1097-1-ND
|-valign="top"
||1 ||10uF ||CPOL-EUA/3216-18R ||C18, C105 ||Kemet ||T491A106M010AS ||DK 399-1564-1-ND MO-80-T491A106K010
|-valign="top"
||1 ||22uF ||CPOL-EUB/3528-21R ||C20 ||Kemet ||B45196H1226M209 ||DK 495-2185-1-ND
|-valign="top"
||1 ||47uF/16V ||CPOL-EUD/7343-31R ||C5 ||Kemet ||B45197A3476K409 ||DK 495-1544-1-ND
|-valign="top"
||1 ||330uF/10V ||CPOL-EUD/7343-31R ||C1 ||Kemet ||B45197A2337K509 ||DK 495-1536-1-ND
|-valign="top"
||1 ||0.2F ||J1ROUND ||C77 ||Panasonic - ECG ||EEC-EN0F204J1 ||DK P11070CT-ND
|-valign="top"
||1 ||AD8552RU ||AD8552RU ||IC2 ||Analog Devices Inc ||AD8552ARU ||DK AD8552ARU-ND
|-valign="top"
||1 ||BAS70 ||BAS70 ||D1 ||Micro Commercial Co. ||BAS40-TP ||DK BAS40TPMSCT-ND
|-valign="top"
||1 ||STPS2L ||STPS2L ||D2 ||STMicroelectronics ||STPS2L30A ||DK 497-3759-1-ND
|-valign="top"
||1 ||CD4015B ||CD4015B ||IC1 ||Texas Instruments ||CD4015BPWR ||DK 296-14090-1-ND
|-valign="top"
||1 ||12MHz ||CRYSTAL_CTS ||Q1 ||CTS-Frequency Controls ||405C35B12M00000 ||DK CTX639CT-ND
|-valign="top"
||1 ||DDTA143 ||MUN2111T1 ||T1 ||Diodes Inc ||DDTA143ZCA-7 ||DK DDTA143ZCADICT-ND
|-valign="top"
||1 ||L5973D ||L5973D ||REG1 ||STMicroelectronics ||L5973D013TR ||DK 497-3638-1-ND
|-valign="top"
||1 ||REG1117 ||REG1117 ||REG2 ||National Semiconductor ||LM1117MP-3.3 ||DK LM1117MP-3.3CT-ND
|-valign="top"
||1 ||LEA-4P ||LEA-4P ||GPS ||Microblox ||LEA-4P-0-000-0 || -
|-valign="top"
||1 ||GPS_ANT_13 ||GPS_ANT_13 ||ANTENNA ||Sangshin || KSA-ST1580MS13 || -
|-valign="top"
||1 ||LPC2148 ||LPC2148 ||MCU ||Philips ||LPC2148FBD64-S ||DK 568-1765-ND
|-
|}
 
DK = digikey
 
MO = mouser
 
RS = radiospares
</small>

Latest revision as of 01:34, 11 December 2011

Redirect to:

Retrieved from "http://wiki.paparazziuav.org/w/index.php?title=Tiny_v1.1&oldid=10966"