Search results

Jump to navigation Jump to search

  • Explorer/RaspberryPi/DualLink
    /home/pprz/Projects/paparazzi/sw/ground_segment/tmtc/link -udp -id 2 -redlink /home/pprz/Projects/paparazzi/sw/ground_segment/tmtc/link -d /dev/paparazzi/xbee -transport xbee -s 57600 -id 1 -redlink
    1 KB (157 words) - 05:53, 22 July 2020
  • Conf.xml
    ...t> is the file name containing the set of messages sent over the telemetry link ...taining the set of parameters that can be configured through the telemetry link
    2 KB (295 words) - 08:48, 22 August 2011
  • Community Flight Log Archive
    ** add kinomap link ** user name, location, group affiliation, wiki user page link,
    3 KB (424 words) - 06:35, 10 March 2011
  • Apogee
    [[Image:Apogee_v100_top_1E.JPG|150px|link=Apogee/v1.00]][[Apogee/v1.00|''' Apogee v1.00''']]<br><br>
    100 bytes (18 words) - 01:45, 4 August 2013
  • Explorer
    - a camera link <br /> - an additional communication link <br />
    1 KB (163 words) - 00:16, 7 July 2020
  • Tawaki
    [[Image:Tawaki_v100_top_hand.JPG|150px|link=Tawaki/v1.10]][[Tawaki/v1.10|''' Tawaki v1.10''']]<br><br>
    102 bytes (18 words) - 09:16, 22 September 2020
  • Chimera
    [[Image:Chimera_v100_top_1E.JPG|150px|link=Chimera/v1.00]][[Chimera/v1.00|''' Chimera v1.00''']]<br><br>
    104 bytes (18 words) - 08:42, 15 February 2017
  • DevGuide/USB-Serial
    ...'''/dev/ttyACM0''' on a Linux system. Use this as device for the Paparazzi link application. The baudrate can be set to any value as it is fully virtual. sw/ground_segment/tmtc/link -d /dev/ttyACM0
    1 KB (176 words) - 02:22, 15 April 2015
  • Setting up simulation environment
    *Install Flightgear and link it to Paparazzi. See [[Simulation#View_the_simulation_in_Flight_Gear]].
    470 bytes (73 words) - 03:50, 16 November 2012
  • Beth Test Bench
    ...p), starting the programs (via ssh), paparazzi telemetry and datalink (via link's -udp option) ...ent driven loop that sends telemetry, receives datalink, initiates the spi link com with Lisa's stm32, and is otherwise free to run control algorithms.
    5 KB (798 words) - 18:10, 9 March 2011
  • Get Hardware
    == [[File:1bitsquared_logo.png|100px|link=http://1bitsquared.com]] 1BitSquared == == [[File:Drotek.png|100px|link=http://www.drotek.fr]] Drotek ==
    7 KB (943 words) - 08:57, 18 June 2016
  • Redundant Communication
    ...t: right; width: 45%; overflow: hidden">[[Image:link_page.png|center|397px|Link Page in GCS]]</div> ...aircraft and the ground station in a redundant fashion so that even if one link is lost, communication can be maintained. So far, the aircraft to ground co
    18 KB (3,117 words) - 09:33, 30 June 2016
  • Builds/Tests
    * Start up the '''link''' program * Stop the '''server''' and '''link''' processes
    2 KB (401 words) - 07:29, 14 June 2016
  • Explorer/RaspberryPi/Autopilot
    paparazzi/sw/ground_segment/tmtc/link -udp
    4 KB (397 words) - 07:08, 31 July 2020
  • STLink
    [[Image:St-link.jpg|right|450px]] ...Link V2] on board, with one exception; the STM32VL version comes with a ST-Link V1.
    6 KB (986 words) - 14:34, 16 December 2020
  • Installation/Windows10
    ...Se] or STM32 [https://www.st.com/en/development-tools/stsw-link004.html ST-LINK Utility] for ST microcontrollers) ST-Link Utility.png|ST-Link Utility
    6 KB (944 words) - 05:19, 26 April 2022
  • ATmega168 PPM Encoder Board
    <code>avrdude -p atmega168 -P <Insert port here> -c <Insert ISP type here> -U lfuse:w:0b00100010:m -U efuse:w:0b111:m -U flash:w:servo2ppm+bootloader :*Link to firmware file: ''[[http://www.rcgroups.com/forums/showpost.php?p=1434784
    3 KB (454 words) - 20:08, 4 March 2012
  • Paparazzi Center
    === Data Link === ...e_the_environment|For more details and examples of command line options go here.]]
    6 KB (975 words) - 19:02, 31 July 2020
  • Lisa/S
    [[File:tudelft_logo.jpg|left|120px|link=http://mavlab.lr.tudelft.nl/en/]] [[File:1bitsquared_logo.png|left|120px|link=http://1bitsquared.com]]
    4 KB (652 words) - 04:24, 28 November 2017
  • Downloads
    * Upload your patches, scripts, etc. here. Please sign your entry! * Link to paparazzi on your gear: [[Image:paparazzi_qr.png|thumb|70px]]
    1 KB (201 words) - 09:02, 13 January 2014
  • LAAS Mentor
    ...ttp://www.modelmotors.cz/index.php?page=61&product=2820&serie=10&line=GOLD Link]
    2 KB (304 words) - 05:51, 20 May 2011
  • Debug Probes
    ...Magic Probe Mini is available through the [[File:1bitsquared_logo.png|50px|link=http://1bitsquared.com/products/black-magic-probe]] [http://1bitsquared.com [[Image:CricketProbe_v100.jpg|300px|left|link=CricketProbe/v1.00 |CricketProbe v1.00 page]]
    8 KB (1,238 words) - 05:32, 28 November 2017
  • Booz
    ...rate you use. In my case 57600. So I use: -s 57600. Then click "Redo" and link will be restarted with the new flag and value (and you will start seeing me
    5 KB (829 words) - 16:53, 20 June 2012
  • Lisa Gumstix Breakout
    ...d RTS pins broken out, in case someone would want to set up an PPP network link using two Digi XTends. It is not possible to use software flow control in t
    1 KB (213 words) - 13:05, 30 November 2012
  • Tunnel
    ...to 8-pin Molex Picoblade Male-connector cable (optional, can use wireless link) ...oard. So, using the 8-pin Molex to FTDI cable adapter (or use the wireless link e.g. XBee) you can use your computer to interact with the GPS module. One e
    5 KB (777 words) - 12:46, 22 November 2017
  • Subsystem/telemetry
    ...h the standard serial protocol before attempting to setup an addressed API link. There are no real reasons for the novice user to use the xbee protocol ove ...drate for the link in the GCS by specifying ''-s 57600'' as a parameter to link. Then just save your session so you won't have to change it again next time
    8 KB (1,271 words) - 03:02, 24 July 2015
  • Lisa USB
    ...e ID pin must be connected to GND and 5V needs to be wired from somewhere. Here's an example wire harness that uses GND and 5V from Lisa's POWER connector: | 6 || D-Link DWL-G122 HW Ver. C Firm Ver 3.1|| wifi || USBOTG with Hub || 07d1:3c03 || r
    7 KB (1,110 words) - 19:41, 9 March 2011
  • TU Delft - StratoBlimp
    [[File:tudelft_logo.jpg|link=http://tudelft.nl/en/]] [[File:Commlinks.png|thumb|right|Link budgets]]
    9 KB (1,512 words) - 15:51, 14 February 2013
  • Multiple Parrot Drones as Swarm via WiFi Router
    There is a configuration to make. Here are some examples as a start: ~/paparazzi/sw/ground_segment/tmtc/link -udp -udp_broadcast
    2 KB (345 words) - 11:31, 21 June 2023
  • DevGuide/LearningToProgram
    Details and tips on contributing the source code can be found here: https://github.com/paparazzi/paparazzi/blob/master/CONTRIBUTING.md ...already than we could ever provide in this Wiki. Therefore there are only link to learning these languages.
    2 KB (356 words) - 03:54, 28 November 2017
  • Disco
    Here are some differences or addition compared to the [[Bebop]] hardware: The RC input is recommended for the safety link instead of using the Wifi link to control the plane in manual or assisted mode.
    11 KB (1,894 words) - 02:27, 11 March 2020
  • ImuCalibration/Gyroscopes
    <program name="Data Link"> <program name="Data Link">
    7 KB (961 words) - 11:20, 18 March 2013
  • SuperbitRF
    [[File:tudelft_logo.jpg|left|150px|link=http://tudelft.nl/en/]] [[File:1bitsquared_logo.png|left|150px|link=http://1bitsquared.com]]
    9 KB (1,518 words) - 06:01, 5 August 2015
  • OLSR
    The '''Optimized Link State Routing Protocol (OLSR)''' [http://en.wikipedia.org/wiki/Optimized_Li
    2 KB (388 words) - 06:50, 15 April 2015
  • Overview
    * [[RC_Receivers_and_Radios|RC Receiver]] (safety link) ...fixed-wing system layout is presented. The classic MicroJet is illustrated here. Different configurations are certainly possible!
    20 KB (2,973 words) - 13:22, 22 January 2018
  • Mission computer
    ...pilot then communicates with the GCS over wireless [[Telemetry|telemetry]] link, using also [https://github.com/paparazzi/pprzlink pprzlink]. ...ing (and are connected to the autopilot via serial port, we need to start 'link' to decode the serial protocol to Ivy messages and publish them on the bus.
    12 KB (1,845 words) - 13:57, 27 November 2017
  • Failsafe
    ...ed and of course throttle down: it is not recommended to try to make turns here with aileron deflections. A small rudder deflection on the other hand is re ==== RC link failure while manual or AUTO1 ====
    11 KB (1,873 words) - 16:29, 30 April 2015
  • Krooz
    ...on-board telemetry solution, with a possibility to connect other telemetry link over one of the UART connectors. ...//github.com/softsr/libopencm3/tree/master/examples/stm32/f4/krooz/usb_dfu here], clone to your PC an build or use a precompiled [https://github.com/softsr
    4 KB (670 words) - 06:34, 25 January 2013
  • Lisa/S/Tutorial/Nano Quadcopter
    ..."sudo ln -s /dev/cu.usbmodemE3BBA8B7 /dev/ttyACM0 " command. Check the sym link by "ls -l /dev/ttyACM0 " command. Now the flashing should work. ...o Quadcopter Kit is available through the [[File:1bitsquared_logo.png|50px|link=http://1bitsquared.com/products/lisa-s-nano-quadcopter-kit]] [http://1bitsq
    11 KB (1,859 words) - 12:30, 6 January 2016
  • NavStik
    [[File:tudelft_logo.jpg|left|120px|link=http://mavlab.lr.tudelft.nl/en/]]
    3 KB (405 words) - 04:56, 7 June 2014
  • TU Delft - Autonomous Quadrotor
    [[File:tudelft_logo.jpg|right|150px|link=http://tudelft.nl/en/]] More information on each project can be found here:
    3 KB (482 words) - 14:03, 16 June 2013
  • ADS-B
    [http://en.wikipedia.org/wiki/Automatic_dependent_surveillance-broadcast link Wikipedia] Here we use the following projects:
    3 KB (473 words) - 04:01, 8 November 2015
  • Video
    ...icrocameras.com]. If you´re looking for Panasonic KX-xxx cameras find them here: [http://rangevideo.com/index.php?main_page=index&cPath=6 RangeVideo]. * Available here too [http://rangevideo.com/index.php?main_page=index&cPath=6 RangeVideo]
    14 KB (2,273 words) - 19:50, 7 January 2016
  • TU Delft - Search and Rescue with AR Drone 2
    ...al can be found [[ Virtualbox 4.1.22 for Windows Hosts & Ubuntu 12.04 LTS| here]]. ...r project the operating system Ubuntu was used, so all the steps described here are for an Ubuntu operating system.
    8 KB (1,237 words) - 05:03, 28 November 2017
  • LisaOveroImage
    * Ubuntu 10 will also need to remove the link for /bin/sh that points to dash and instead point it to bash ...beforehand you can find it [http://gitorious.org/linux-omap3/openembedded Here])
    3 KB (509 words) - 04:02, 11 December 2012
  • FlightGear
    ...ki.flightgear.org/Scripted_Compilation_on_Linux_Debian/Ubuntu can be found here] To make them available in flightgear, make a link from ''/usr/share/games/flightgear/Models/Aircraft/paparazzi'' to ''<papara
    3 KB (457 words) - 13:19, 8 March 2021
  • Ivy
    ...subscribe_pattern Publish-Subscribe (or pub/sub)] bus used in Paparazzi to link the different components of the ground network together. See [[Overview#Sy
    3 KB (476 words) - 03:11, 24 August 2023
  • Use the USB port on Parrot Drones
    ...lucky us ;), let's go and interrogate them, see what we have here via: {HERE}...
    10 KB (1,669 words) - 07:48, 18 May 2022
  • Laird RM024 setup
    ...modems own (MAC) address can not be changed. This makes the ground station link and on-board software a little more complicated than the XBee API mode.
    3 KB (476 words) - 13:20, 15 January 2014
  • SUMO/rc transmitter
    ...r off). By turning off the sum signal the Paparazzi system can detect a RC link loss and switch to emergency modes.
    3 KB (546 words) - 10:58, 16 March 2014

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)

Retrieved from "http://wiki.paparazziuav.org/wiki/Special:Search"