Difference between revisions of "MeteoStick v1.00"
Jump to navigation
Jump to search
(→Pinout) |
(Mechanical) |
||
Line 110: | Line 110: | ||
Image:MeteoStick_v100_top_components.png|CricketProbe v1.00 top components detail | Image:MeteoStick_v100_top_components.png|CricketProbe v1.00 top components detail | ||
</gallery> | </gallery> | ||
== Mechanical Dimensions == | == Mechanical Dimensions == | ||
[[Image:MeteoStick_v100_top_mechanical_dimensions.png|600px|MeteoStick v1.00 Top Mechanical Dimensions]] | |||
[[Image:MeteoStick_v100_side_mechanical_dimensions.png|600px|MeteoStick v1.00 Side Mechanical Dimensions]] | |||
[[Category:Sensors]] | [[Category:Sensors]] |
Revision as of 09:41, 19 April 2016
MeteoStick is a temperature, humidity, absolute pressure (Barometer) and differential pressure (airspeed/pitot) precision measurement board.
Features
Hardware Revision History
Version # | Release Date | Release Notes |
---|---|---|
v1.00 | 11/2014 | Initial release of MeteoStick |
Pictures
Pinout
Pins Name and Type are specified with respect to the MeteoStick Board
Pin # | Name | Type | Description |
---|---|---|---|
1 | GND | PWR | Common Ground |
2 | VBAT | PWR | +7 to 20V Power Supply (3-4 Lipo Cells) |
Pin # | Name | Type | Description |
---|---|---|---|
1 | GND | PWR | Common Ground |
2 | CS BARO | IN | Barometer ADC Chip Select (Active Low) |
3 | CS PITOT | IN | Airspeed/Pitot ADC Chip Select (Active Low) |
4 | CS TEMP | IN | Temperature ADC Chip Select (Active Low) |
5 | CS MEM | IN | EEPROM Memory Chip Select (Active Low) |
6 | SCLK | IN | SPI Clock Input (Clock Output from Master) |
7 | MOSI | IN | SPI Master Out Slave In. MeteoStick Data Input (Data Output from Master) |
8 | MISO | OUT | SPI Master In Slave Out. MeteoStick Data Output (Data Input from Master) |
9 | HUM | OUT | Humidity Controlled Oscillator Output |
Pin # | Name | Type | Description |
---|---|---|---|
1 | TEMP SENS | IN | Temperature Sensor Input (PT1000 RTD) |
2 | TEMP SENS | IN | Temperature Sensor Input (PT1000 RTD) |
3 | HUM SENS | IN | Humidity Sensor Input (P14 Capacitive) |
4 | HUM SENS | IN | Humidity Sensor Input (P14 Capacitive) |
Schematic
PCB
Gerber & Drill Files
2 Layers PCB design Eurocircuits 6-C class compliant:
Download MeteoStick v1.00 gerber & drill files (zip)
RS274X, units = Inches, format = 2:5
- MeteoStick_v100_Silkscreen_Top.GBR (Top Print Layer)
- MeteoStick_v100_Soldermask_Top.GBR (Top Solder Mask)
- MeteoStick_v100_Paste_Mask_Top.GBR (Top Paste Mask, stencil)
- MeteoStick_v100_Signal_Top.GBR (Top Copper Layer)
- MeteoStick_v100_Signal_Bottom.GBR (Bottom Copper Layer)
- MeteoStick_v100_Soldermask_Bottom.GBR (Bottom Solder Mask)
- MeteoStick_v100_Outline.GBR (Board Outline)
- MeteoStick_v100_Drill.GBR (NC XY coordinates & Drill tools sizes)