Search results

'''WARNING:''' the functionalities described in this section are experimental and have ...light version of a TCAS-inspired system has been implemented. It can send warning to the ground station and if nothing is done, it takes control of the verti

...e opened because it is from an unidentified developer." To get rid of this error you will need to: ...rst time it starts up.) (If you get the error: "Fatal error: exception Gtk.error("GtkMain.init: initialization failed ml_gtk_init: initialization failed")"

...e static accuracy of the computed angle will be very good, but the dynamic error of the computed angle may be bad. ...ff frequency when the vehicle is accelerating: norm(ax,ay,az) ~ 9,81 m/s2. WARNING: when the IMU is not well damped, the norm of accelerometers never equals t

...ollowing picture) is connected on Lisa/M to GYRO_SS. To prevent a software error induced shorting of the Lisa/M GYRO_SS pin to ground, remove the castellati

<span style="color:#FF0000">'''WARNING! Only use if you are proficient in working with Linux!'''</span> # It seems that the error "unbound module GnoCanvas" can be resolved by installing lablgtk2 via yaour

'''WARNING:''' '''WARNING: THERE IS AN ERROR IN THESE GERBER FILES!'''

This directive is extremely powerful and has great potential for error - use with caution. ...and it will save the data in ''data/srtm'' directory, so you don't get the warning any more and check the ground altitude even without GPS.

.../b> are tweaked well, you get precise energy estimations with less than 5% error independent of your flight pattern without even requiring a [[Current_senso ...tt>LOW</tt></b> values will also used as threshold for '''CRITIC''' and '''WARNING''' alarms. They are optional and the respective defaults are 10.0 and 10.5V

...still possible, but running it on the Parrot AR.Drone2 would result of an error message: The new 6 pin of 2013 PCB design. '''Warning''', mind pin 1, there is the full 12V battery voltage! Access the port via