Difference between revisions of "Tunnel"

From PaparazziUAV
Jump to: navigation, search
Line 9: Line 9:
 
<li>Connect 8-pin Molex Connector on the Adapter cable to "usb" on Tiny2.11
 
<li>Connect 8-pin Molex Connector on the Adapter cable to "usb" on Tiny2.11
 
<li>Power on Tiny2.11
 
<li>Power on Tiny2.11
<li>Enter this command in a terminal: make upload_bl PROC=GENERIC
+
<li>Enter this command in a terminal: make AIRCRAFT=ppz1 tunnel.upload
 
</ol>
 
</ol>
 
<p>Success will show this in the last lines of the terminal window</p>
 
<p>Success will show this in the last lines of the terminal window</p>

Revision as of 11:03, 23 April 2008

Required Cables:

  1. USB cable
  2. USB to 8-pin Molex Picoblade connector adapter cable

Steps:

  1. Connect USB Cable + 8-pin Molex adapter to USB on your laptop
  2. Connect 8-pin Molex Connector on the Adapter cable to "usb" on Tiny2.11
  3. Power on Tiny2.11
  4. Enter this command in a terminal: make AIRCRAFT=ppz1 tunnel.upload

Success will show this in the last lines of the terminal window

Found USB device
BootROM code: 2.12
Part ID: 0x0402FF25 (LPC2148, 512k Flash, 32k+8k RAM)
BootLoader version: 1.3
#
Starting software at 0x00004000

BACK