Difference between revisions of "Tiny GPS config"

From PaparazziUAV
Jump to: navigation, search
 
(13 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 
Prerequisites:
 
Prerequisites:
 
<ol>
 
<ol>
<li>Must have loaded USB Boot Loader software
+
<li>Must have loaded [http://paparazzi.enac.fr/wiki/USB_Boot_Loader USB Boot Loader] software
<li>Must have loaded "tunnel"
+
<li>Must have loaded [http://paparazzi.enac.fr/wiki/index.php/Tunnel "tunnel"]
<li>Must have downloaded and installed u-center
+
<li>Must have downloaded and installed [http://www.u-blox.com/customersupport/download/uCenterSetup.zip u-center]
 
<li>Must have downloaded, uncompressed the [http://paparazzi.enac.fr/wiki_images/Tiny_LEA-4P-v6.zip LEA-4P] config file
 
<li>Must have downloaded, uncompressed the [http://paparazzi.enac.fr/wiki_images/Tiny_LEA-4P-v6.zip LEA-4P] config file
 
</ol>
 
</ol>
 
Required Cables:  
 
Required Cables:  
 
<ol>
 
<ol>
<li>FTDI Serial Adapter Cable
+
<li>[[Image:Ftdicbl.jpg|32px]]FTDI Serial Adapter Cable
<li>8-pin Molex Picoblade connector to 6-pin FTDI cable
+
<li>[[Image:Gpscbl1.jpg|32px]]8-pin Molex Picoblade connector to 6-pin FTDI cable
 
</ol>
 
</ol>
 
Steps:
 
Steps:
 
<ol>
 
<ol>
<li>Connect FTDI cable + 8-pin Molex adapter to USB on your laptop
+
<li>Connect FTDI Cable + 8-pin Molex adapter to USB on your laptop
 
<li>Connect 8-pin Molex to "serial1" on Tiny2.11
 
<li>Connect 8-pin Molex to "serial1" on Tiny2.11
 
<li>Power on Tiny2.11
 
<li>Power on Tiny2.11
 
<li>Start u-center application
 
<li>Start u-center application
<li>set connection speed to 9600BPS (LEA-4P factory default)
+
<li>set connection 'baudrate' to 9600BPS (LEA-4P factory default)
 
<li>Menu: Tools/GPS Config select the file to upload (LEA-4P file downloaded)
 
<li>Menu: Tools/GPS Config select the file to upload (LEA-4P file downloaded)
 
<li>Click File >> GPS button to send the file to the GPS
 
<li>Click File >> GPS button to send the file to the GPS
 
<li>About 2/3 the way through it will stop. At this point change 'baudrate' to 38,4000 connection and it will continue and finish
 
<li>About 2/3 the way through it will stop. At this point change 'baudrate' to 38,4000 connection and it will continue and finish
 
</ol>
 
</ol>
[http://paparazzi.enac.fr/wiki/index.php/Tiny_v2#Programming BACK]
+
[http://paparazzi.enac.fr/wiki/Tiny_v2#Programming BACK]
 +
 
 +
[[Category:User_Documentation]]

Latest revision as of 03:41, 28 September 2013

Prerequisites:

  1. Must have loaded USB Boot Loader software
  2. Must have loaded "tunnel"
  3. Must have downloaded and installed u-center
  4. Must have downloaded, uncompressed the LEA-4P config file

Required Cables:

  1. Ftdicbl.jpgFTDI Serial Adapter Cable
  2. Gpscbl1.jpg8-pin Molex Picoblade connector to 6-pin FTDI cable

Steps:

  1. Connect FTDI Cable + 8-pin Molex adapter to USB on your laptop
  2. Connect 8-pin Molex to "serial1" on Tiny2.11
  3. Power on Tiny2.11
  4. Start u-center application
  5. set connection 'baudrate' to 9600BPS (LEA-4P factory default)
  6. Menu: Tools/GPS Config select the file to upload (LEA-4P file downloaded)
  7. Click File >> GPS button to send the file to the GPS
  8. About 2/3 the way through it will stop. At this point change 'baudrate' to 38,4000 connection and it will continue and finish

BACK