Difference between revisions of "Talk:Lisa/Bone"
Jump to navigation
Jump to search
| (3 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
JKG Questions: | JKG Questions: | ||
*Do we need a power supply on the cape? It will increase cost quite a bit. If Lisa/M is still connected directly to peripherals it may as well get power from off-board, most vehicles already have a 5-6V servo bus | *Do we need a power supply on the cape? It will increase cost quite a bit. If Lisa/M is still connected directly to peripherals it may as well get power from off-board, most vehicles already have a 5-6V servo bus | ||
Neo: I thought the cape would have a voltage ragulator which can power the F4 and BBB. Maybe a different power rail for the servos. | |||
* fully-populated Lia vs Lisa/M? | * fully-populated Lia vs Lisa/M? | ||
** Allows (almost) all connections to be broken out through the cape and BBB -- 0.1" header pins on Lia and sockets on cape with screws to lock boards together | ** Allows (almost) all connections to be broken out through the cape and BBB -- 0.1" header pins on Lia and sockets on cape with screws to lock boards together | ||
| Line 8: | Line 10: | ||
Note from Bryan: | Note from Bryan: | ||
The SPI bus on the BB only can act as master. This would make the BB have to do busy loops polling the autopilot to check for data. I propose CAN as it has error detection and data framing. | *The SPI bus on the BB only can act as master. This would make the BB have to do busy loops polling the autopilot to check for data. I propose CAN as it has error detection and data framing. | ||
*The lithium battery system only can act as a charger. The BB's power supply will not let it run on the nominal 3.6v of the lithium cell without a boosting SMPS. | |||
Latest revision as of 03:17, 15 April 2014
JKG Questions:
- Do we need a power supply on the cape? It will increase cost quite a bit. If Lisa/M is still connected directly to peripherals it may as well get power from off-board, most vehicles already have a 5-6V servo bus
Neo: I thought the cape would have a voltage ragulator which can power the F4 and BBB. Maybe a different power rail for the servos.
- fully-populated Lia vs Lisa/M?
- Allows (almost) all connections to be broken out through the cape and BBB -- 0.1" header pins on Lia and sockets on cape with screws to lock boards together
- much less wire nest
- no header pin access to ANALOG1 or ANALOG2
- Allows (almost) all connections to be broken out through the cape and BBB -- 0.1" header pins on Lia and sockets on cape with screws to lock boards together
Note from Bryan:
- The SPI bus on the BB only can act as master. This would make the BB have to do busy loops polling the autopilot to check for data. I propose CAN as it has error detection and data framing.
- The lithium battery system only can act as a charger. The BB's power supply will not let it run on the nominal 3.6v of the lithium cell without a boosting SMPS.