Difference between revisions of "STLink"
(stlink to blackmagic added) |
|||
| Line 82: | Line 82: | ||
To use stlink (requires line above)<br/> | To use stlink (requires line above)<br/> | ||
Set '''STLINK=y'''<br/> | Set '''STLINK=y'''<br/> | ||
==Update the STLink to blackmagic probe== | |||
This is currently only a link to a seperate site: | |||
[[http://embdev.net/articles/STM_Discovery_as_Black_Magic_Probe|how to upload the blackmagic probe firmware to the stlink of a discovery board]] | |||
[[Category:Firmware Flashing]] | [[Category:Firmware Flashing]] | ||
Revision as of 11:05, 13 October 2013
SWD can be used to upload the firmware to stm32fx MCU.
A ST-Link is needed, any stm32-discovery board has a ST-LinkV2 on it (starts @ 8€). stm32vl discovery has a ST-LinkV1.
A standard ST-Link costs from 17€
SWD Header
| Pin\Function | CN2 | Use |
| ●1 | VDD_Target | Voltage supply for target |
| 2 | SWDCLK | SWD clock |
| 3 | GND | Ground |
| 4 | SWDIO | SWD data input/output |
| 5 | NRST | reset for target |
| 6 | SWO | reserved |
Pin 1 has a withe dot on the left side.
Needed Tools
st-flash and st-util are needed Tools from texane
download and compile
git clone git://github.com/texane/stlink.git stlink cd stlink ./autogen.sh ./configure make
copy in the suitable directory (so it can be accessed direct with terminal, without enviroment variable)
sudo cp st-flash /usr/bin sudo cp st-util /usr/bin
add udev rules (replace user with your username)
sudo cp /home/user/stlink/49-stlinkv*.rules /etc/udev/rules.d sudo udevadm control --reload-rules
For ST-LinkV1 take a look at the readme.txt !
Test it
To copy the file from the MCU
st-flash read ~/STM32F4-Discovery.bin 0x8000000 0x100000
Output (just a example for the factory preload image)
INFO src/stlink-usb.c: -- exit_dfu_mode INFO src/stlink-common.c: Loading device parameters.... src/stlink-common.c: Device connected is: F4 device, id 0x10016413 INFO src/stlink-common.c: SRAM size: 0x30000 bytes (192 KiB), Flash: 0x100000 bytes (1024 KiB) in pages of 16384 bytes
stm32f4-discovery shoud be found at /dev/stlinkv2_2
how can that be tested ? please fix me :)
usb device
lsusb Bus 002 Device 007: ID 0483:3748 SGS Thomson Microelectronics ST-LINK/V2
Howto
Connect the ST-Link to the MCU. If a complete stm32fx-discovery board is used, CN3 jumpers need to be set. To program a external MCU, remove CN3 jumpers and connect the external MCU with the SWD header.
To use SWD
Set FLASH_MODE=SWD
To use stlink (requires line above)
Set STLINK=y
Update the STLink to blackmagic probe
This is currently only a link to a seperate site:
[to upload the blackmagic probe firmware to the stlink of a discovery board]