Difference between revisions of "SDLogger SPI Direct"
Jump to navigation
Jump to search
BartSlinger (talk | contribs) (Page creation) |
(No difference)
|
Revision as of 16:39, 10 November 2015
The direct SPI SD Logger is originally designed to be used with the Lisa/S, but should also be compatible with other supported autopilots. It connects directly to the SPI bus of the autopilot and communicates using the SDCards SPI interface. This method is slower than when using it in SD mode, but the speed is sufficient to log IMU data at 512 Hz.
File:LisaSD
Lisa/SD module