Difference between revisions of "Module/Mag HMC58xx"
Jump to navigation
Jump to search
(Documented HMC58xx module) |
(No difference)
|
Revision as of 16:58, 29 July 2015
Introduction
Paparazzi allows the use of external Magnetometers. This module supports the use of the Honeywell HMC5843 and HMC5883 magnetometers. These magnetometers can be connected to your autopilot board via i2c.
| File: conf/airframes/myplane.xml |
<firmware>
...
<define name="USE_I2C2" />
...
<subsystem name="ahrs" type="float_cmpl_quat">
<define name="AHRS_XXX_MAG_ID" value="MAG_HMC58XX_SENDER_ID"/>
</subsystem>
</firmware>
...
<modules>
<load name="mag_hmc58xx.xml">
<define name="MODULE_HMC58XX_UPDATE_AHRS"/>
<define name="MAG_HMC58XX_I2C_DEV" value="i2c2"/>
</load>
</modules>
|
You will need to specify the AHRS_XXX_MAG_ID value. See AHRS External Sensors