Difference between revisions of "Lisa"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
== Hardware == | == Hardware == | ||
The hardware is | The hardware is still in development. The current CAD files are maintained in savannah svn in the paparazzi4/trunk/hw/lisa directory | ||
Software development is done on a Overo/Summit + Olimex STM32-H103 dev board | Software development is done on a Overo/Summit + Olimex STM32-H103 dev board | ||
| Line 20: | Line 20: | ||
=== Open Embedded === | === Open Embedded === | ||
Open Embedded is the linux distribution used on the overo. | |||
You can follow the [http://www.gumstix.net/Setup-and-Programming/view/Overo-Setup-and-Programming/Setting-up-a-build-environment/111.html instructions] on gumstix's website to build a complete cross development environment. Paparazzi's Makefile will default to look for it in /overo-oe | You can follow the [http://www.gumstix.net/Setup-and-Programming/view/Overo-Setup-and-Programming/Setting-up-a-build-environment/111.html instructions] on gumstix's website to build a complete cross development environment. Paparazzi's Makefile will default to look for it in /overo-oe | ||
Revision as of 07:29, 9 October 2009
Lisa is a STM32/Overo board designed to run Paparazzi
Hardware
The hardware is still in development. The current CAD files are maintained in savannah svn in the paparazzi4/trunk/hw/lisa directory Software development is done on a Overo/Summit + Olimex STM32-H103 dev board
Software
STM32 toolchain
You can use the summon-arm-toolchain script to build the required toolchain. If you want the default values of the Paparazzi Makefile to work, you should set
PREFIX=/opt/stm32/toolchain/arm-elf
Open Embedded
Open Embedded is the linux distribution used on the overo. You can follow the instructions on gumstix's website to build a complete cross development environment. Paparazzi's Makefile will default to look for it in /overo-oe