Difference between revisions of "File:Tiny13wIMU 001.jpg"

From PaparazziUAV
Jump to navigation Jump to search
(Photo showing how I wired up an ArduIMU to a Tiny13 autopilot. I would have used a TWOG instead but had zero room inside the Multiplex Merlin. 5v and ground from a servo connector and the two I2C wires from the serial1 connector.)
 
(Maintenance script uploaded a new version of "File:Tiny13wIMU 001.jpg")
 
(No difference)

Latest revision as of 04:14, 8 January 2014

Photo showing how I wired up an ArduIMU to a Tiny13 autopilot. I would have used a TWOG instead but had zero room inside the Multiplex Merlin. 5v and ground from a servo connector and the two I2C wires from the serial1 connector.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current04:14, 8 January 2014Thumbnail for version as of 04:14, 8 January 2014640 × 478 (41 KB)Maintenance script (talk)Importing file
22:29, 9 November 2010No thumbnail640 × 478 (41 KB)Dconger (talk | contribs)Photo showing how I wired up an ArduIMU to a Tiny13 autopilot. I would have used a TWOG instead but had zero room inside the Multiplex Merlin. 5v and ground from a servo connector and the two I2C wires from the serial1 connector.

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "http://wiki.paparazziuav.org/w/index.php?title=File:Tiny13wIMU_001.jpg&oldid=17323"