Difference between revisions of "File:LisaMX v2 0 DFU.jpg"

From PaparazziUAV
Jump to navigation Jump to search
(Lisa/MX bootloader entry technique for programming via USB - DFU_UTIL. The two pairs of pins circled in red should be shorted as shown. The USB connector should then be plugged in. This action also powers the board. The board can then be flashed using ...)
(No difference)

Revision as of 18:22, 18 November 2014

Lisa/MX bootloader entry technique for programming via USB - DFU_UTIL. The two pairs of pins circled in red should be shorted as shown. The USB connector should then be plugged in. This action also powers the board. The board can then be flashed using DFU-UTIL. Tested functional on a TRI Lisa/M v2.0 using Paparazzi Master branch on 18 Nov 2014.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current18:22, 18 November 2014Thumbnail for version as of 18:22, 18 November 20141,938 × 1,647 (512 KB)Psinha (talk | contribs)Lisa/MX bootloader entry technique for programming via USB - DFU_UTIL. The two pairs of pins circled in red should be shorted as shown. The USB connector should then be plugged in. This action also powers the board. The board can then be flashed using ...

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "http://wiki.paparazziuav.org/w/index.php?title=File:LisaMX_v2_0_DFU.jpg&oldid=19162"