Difference between revisions of "Explorer/RaspberryPi/Wifibroadcast"

Revision as of 05:47, 23 June 2020

The software installation should be done on board (Airpi) and ground (Groundpi) RaspberryPi

sudo apt-get install libpcap-dev libsodium-dev -y

git clone https://github.com/svpcom/wifibroadcast
mv wifibroadcast wifibroadcast-svpcom 
cd wifibroadcast-svpcom
make

Don't worry with error (/bin/sh: 1: trial: not found make: *** [Makefile:43: test] Error 127)

ifconfig wlan1 down
sleep 1
iw dev wlan1 set monitor otherbss
iw reg set DE
ifconfig wlan1 up
iw dev wlan1 set channel 36

/home/pi/wifibroadcast-svpcom/wfb_tx -K /home/pi/wifibroadcast-svpcom/drone.key -p 1 -u 5600 wlan1

/home/pi/wifibroadcast-svpcom/wfb_rx -K /home/pi/wifibroadcast-svpcom/drone.key -p 1 -c 127.0.0.1 -u 6500 wlan1

@@ Line 12: / Line 12: @@
 * Airpi and GroundPi
-  ifconfig $WFB_DEV down
+  ifconfig wlan1 down
   sleep 1
-  iw dev $WFB_DEV set monitor otherbss
+  iw dev wlan1 set monitor otherbss
   iw reg set DE
-  ifconfig $WFB_DEV up
+  ifconfig wlan1 up
-  iw dev $WFB_DEV set channel $WFB_CHAN
+  iw dev wlan1 set channel 36
 * Airpi