Installation/Linux
Introduction
Paparazzi is very easily installed on any laptop or workstation running the Ubuntu Linux OS or virtually any Debian based Linux.
At a high-level here are the steps required to install Paparazzi:
- Install a current Linux distribution (Ubuntu Lucid is recommended at the moment).
- The Linux package sources file is updated to add the Paparazzi packages (/etc/apt/sources.list)
- The Linux packages are updated from the network with the "update" command
- The Paparazzi packages are installed (sudo apt-get install paparazzi-dev paparazzi-arm7)
- Install subversion to get SVN (sudo apt-get install subversion). Don't worry if it's already installed.
- Bring down the sources from the SVN repository: (svn co svn://svn.savannah.nongnu.org/paparazzi/paparazzi3/trunk paparazzi3). Just change the paparazzi3s to paparazzi4s for Booz files.
- Allow access to the ports by copying the rules file: (export PAPARAZZI_HOME=~/paparazzi3; sudo cp $PAPARAZZI_HOME/conf/system/udev/rules/10-paparazzi.rules /etc/udev/rules.d/)
- Compile the binaries from the sources (cd paparazzi3 && make)
That's all.
Operating System
Paparazzi is very easily installed on any laptop or workstation running the Ubuntu Linux OS or virtually any Debian based Linux. Paparazzi is packaged for Debian as well as all of its dependencies. The repository hosted at ENAC holds their latest version.
It is also possible to have your Debian/Ubuntu running in a virtual machine, for instance with VirtualBox. This requires minimal changes to your computer setup, as you can run the VM from all common platforms (Windows, Mac OS X, Linux). The virtual machine image can easily be transferred between different laptops, giving greater flexibility. Unfortunately, the Open-Source Edition of VirtualBox doesn't include the necessary USB support, so you'll need to get the regular version from the website.
If you are new and this is your first time installing it is suggested you keep it simple. Select a system you can dedicate to the Linux installation. No VMs or dual boot configurations. The idea is do a very simple generic installation that is certain to have no issues. This reassures you that the installation process works and you can see and use a working Paparazzi install for some time before you try a more complicated install. The install is well documented below and certain to succeed if followed exactly. Most issues arise when someone unfamiliar with Linux tries a non-standard install that requires special steps not documented here.
Compilers and Handlers
The typical installation contains all of the necessary C and OCaml compilers as well as some XML and Ivy handlers. These tools are provided by the paparazzi-dev package. Have no fear, this is all taken care of for you so all you must do is type a few simple commands. Below are those commands and helpful information. Commands can be copied and pasted from these pages to make it as easy as possible.
Source Code
The Paparazzi source code is hosted by Savannah. It is downloaded using Subversion or git.
Installation of Compilers and Handlers
From the Command Line
For the sources file (sources.list) you only add the line required for your version. Linux names their versions.
Just add the following lines to your repository list (/etc/apt/sources.list) and then uncomment the line relevant to your operating system (e.g. one of etch, gutsy or hardy):
Note: Because of the sources.list file permissions maybe you will need to edit it with root access. In Terminal write this:
gksudo gedit /etc/apt/sources.list
File: /etc/apt/sources.list |
# Uncomment just _one_ of the following lines - depending on your OS version # deb http://paparazzi.enac.fr/debian etch main # deb http://paparazzi.enac.fr/debian lenny main # deb http://paparazzi.enac.fr/ubuntu gutsy main # deb http://paparazzi.enac.fr/ubuntu hardy main # deb http://paparazzi.enac.fr/ubuntu intrepid main # deb http://paparazzi.enac.fr/ubuntu jaunty main # deb http://paparazzi.enac.fr/ubuntu karmic main # deb http://paparazzi.enac.fr/ubuntu lucid main # deb http://paparazzi.enac.fr/ubuntu maverick main |
Then, update your sources and install the dependencies needed for recompiling from the source (dev), and the cross-compilers (arm7 or stm32) :
For ARM7 (i.e. Tiny or TWOG boards) :
sudo apt-get update sudo apt-get install paparazzi-dev paparazzi-arm7
For STM32 (i.e. Lisa boards) :
sudo apt-get update sudo apt-get install paparazzi-dev paparazzi-stm32
Note: The ivy-python package now among the dependencies of paparazzi-dev is also available in the normal paparazzi repository. Allen Ibara might have some newer versions in his PPA but you should not need them.
Optional/Obsolete Packages
Users of the newer Lisa/L or Lisa/S boards will need the paparazzi-stm32 package.
Users of older AVR based boards will also need the paparazzi-avr package.
Older Ubuntu Versions
On older Linux distributions (not needed for lucid and later), the Braille TTY driver interferes with FTDI USB Serial adapters. If somehow your FTDI serial adapter does not work, remove the package via:
sudo apt-get remove brltty
Using Synaptic Package Manager
- Launch Synaptic Package Manager (Applications/System Tools Menu)
- In Settings/Repositories, add a new repository picking the right deb line from above, e.g. deb http://paparazzi.enac.fr/ubuntu maverick main if you use Ubuntu Maverik/10.10.
- Search for paparazzi-dev, and paparazzi-arm7 packages (use the Search button)
- Mark them for installation (right-click on package names)
- Left-click on Apply
Manual Installation of Individual Packages
Users of other Linux flavors than a recent Ubuntu or anyone needing manual control of each individual package can install them independently.
Downloading the Source Code
After the paparazzi-dev package is installed the complete source code should be downloaded from one of the software repositories.
Subversion
See the project page at Savannah for more details. From the directory of your choice type:
svn co svn://svn.savannah.nongnu.org/paparazzi/paparazzi3/trunk paparazzi3
or if you are behind a firewall with an http proxy available:
svn co http://svn.savannah.gnu.org/svn/paparazzi/paparazzi3/trunk paparazzi3
after configuration of your proxy in the ~/.subversion/servers file
This will download all of the code and install it into paparazzi3/
If you cannot use the Subversion install, daily updated tarballs can also be fetched from the Downloads page.
Git
You can also get the source code via a git mirror.
Launching the Software
The first step is to compile. From the paparazzi3 directory (cd paparazzi3), run
make
You will have to run this command after each update of the source (svn update command). Launch the software from the paparazzi3 directory with
./paparazzi
From the Paparazzi Center interface, select the MJ5 aircraft, select the sim target and Build it. Then Execute the Simulation session. The prcedure is detailed in the Simulation page.
Quick Launch Icon
To create an icon on the desktop so you don’t have to manually type codes into the Terminal each time you want to start the GCS follow these steps:
- Save this image file to your /paparazzi3 folder
- Right click anywhere on the Ubuntu desktop and click Create Launcher.
- Enter the following in the fields provided:
- Name: Paparazzi GCS
- Command: /home/YOUR_USER_NAME/paparazzi3/paparazzi
- Comment: Runs the Paparazzi GCS
- Then click the icon image in the top left on the dialog box and select the Paparazzi logo you just downloaded.
- Click the OK button and that’s it! Your icon should appear on the desktop and you are ready to go.
Agents
If (and only if) you want to directly launch some Paparazzi agents (the Tools of the Paparazzi Center), without using the Paparazzi Center, you must have the Paparazzi source and home environment variables set correctly in your shell. These variables can be automatically set in your shell by adding the following lines to your .bashrc file:
File: ~/.bashrc |
export PAPARAZZI_HOME=your paparazzi3 directory export PAPARAZZI_SRC=your paparazzi3 directory |
env Variables
If you wish to manually set the env variables (i.e. when compiling a backup copy of your code in a different folder) execute the following command from the folder you wish to set as your active paparazzi folder:
export PAPARAZZI_HOME=`pwd`;export PAPARAZZI_SRC=`pwd`
Verify that your variables are set correctly with the following command:
env | grep PAPARAZZI
which should return the following:
PAPARAZZI_HOME=your paparazzi3 directory PAPARAZZI_SRC=your paparazzi3 directory
Setting access rights for USB download
This may be required to flash the Paparazzi-boards directly thru USB. For flashing details, see Compiling.
Default linux rights may not allow standard (non root) users to directly access the USB bus. You will need to make yourself a member of the plugdev "group" and then create a "rule", associated with that "group".
Make yourself a member of the plugdev group:
sudo adduser <your login> plugdev
Logout and login again. Then add the appropriate rule (available ine fhe file 10-paparazzi.rules) to the USB handler. Simply copy as root $PAPARAZZI_HOME/conf/system/udev/rules/10-paparazzi.rules to /etc/udev/rules.d/
sudo cp $PAPARAZZI_HOME/conf/system/udev/rules/10-paparazzi.rules /etc/udev/rules.d/
Software Updates
Paparazzi is a very rapidly evolving project and as such, you will find that variables and functions are frequently added, changed, or removed. Update your software with care and caution, and always test the functionality on the ground and in the air as some updates will affect tuning parameters. Your airframe file will not be updated by the Subversion (SVN) system and therefore any new or modified variable names will need to be added manually. The compiler will usually identify the problem variables at which point you can look at some of the most recent airframe files on SVN to find the proper syntax. See the Compiling page for more help if needed.
That said, keeping your software up to date is easy with the Subversion system. The system will compare all source code files with the server and update any that are needed, automatically merging any minor changes that you have incorporated along the way.
To download and automatically merge any updated source files, run the following command from your Paparazzi directory
svn update
After any SVN update or source code modification the code can be recompiled from your paparazzi3 directory with the following command:
make
The make command will only recompile portions of the software where changed have been detected. If it does not behave as expected you can deleted all compiled files and recompile from scratch with the following commands:
make clean make
See the Compiling page for more info.
Users making changes to their code structure may prefer to have more control over the updating and merging process and may wish to install and use tkdiff instead which provides highlighted comparisons of any files that differ between your code and the SVN server and allows for a file by file update.
To update your Linux distribution as well as any dependencies of Paparazzi (seldom necessary), run the following:
sudo apt-get update sudo apt-get upgrade
Using the Live CD
There is a LiveCD available, but it dates back to 2008. It is still an easy way to get a first glimpse on Paparazzi.
From Scratch
In very rare occasions one needs to install the tools used, third-party libraries used by Paparazzi all from scratch. There are are the moment no 64Bit Linux repositories, that is a very good reason to install from scratch. Sometime one just wants to be able to use all the latest and greatest compilers, or source code of everything to improve something. Then there is no other way than to install from scratch. To help you out getting it all smoothly working a special page is created just click here. If you do not understand what that all means, do not panic, then the information on that page is not important to you. Just pretend you never read this part of the Wiki. You are advised just to follow the regular step as described on the install page.