Difference between revisions of "File:LisaMX v2 0 DFU.jpg"
Jump to navigation
Jump to search
(Lisa/MX bootloader entry technique for programming via USB - DFU_UTIL. The two pairs of pins circled in red should be shorted as shown. The USB connector should then be plugged in. This action also powers the board. The board can then be flashed using ...) |
|||
| Line 1: | Line 1: | ||
Lisa/MX bootloader entry technique for programming via USB - DFU_UTIL. | Lisa/MX bootloader entry technique for programming via USB - DFU_UTIL. | ||
The two pairs of pins circled in red should be shorted as shown. | |||
The two pairs of pins circled in red should be shorted (VERY CAREFULLY) as shown, i.e.: | |||
1) The Boot0 and VDD pins on the STM32F4 should be shorted together. | |||
2) The ACC_DRDY (Boot1) and GND pins should be shorted together on the Aspirin mounting pads. (This can be done even if an aspirin IMU is mounted). | |||
The USB connector should then be plugged in. This action also powers the board. | The USB connector should then be plugged in. This action also powers the board. | ||
The board can then be flashed using DFU-UTIL. | The board can then be flashed using DFU-UTIL. | ||
Tested functional on a TRI Lisa/M v2.0 using Paparazzi Master branch on 18 Nov 2014. | Tested functional on a TRI Lisa/M v2.0 using Paparazzi Master branch on 18 Nov 2014. | ||
Latest revision as of 18:25, 18 November 2014
Lisa/MX bootloader entry technique for programming via USB - DFU_UTIL.
The two pairs of pins circled in red should be shorted (VERY CAREFULLY) as shown, i.e.: 1) The Boot0 and VDD pins on the STM32F4 should be shorted together. 2) The ACC_DRDY (Boot1) and GND pins should be shorted together on the Aspirin mounting pads. (This can be done even if an aspirin IMU is mounted).
The USB connector should then be plugged in. This action also powers the board. The board can then be flashed using DFU-UTIL. Tested functional on a TRI Lisa/M v2.0 using Paparazzi Master branch on 18 Nov 2014.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 18:22, 18 November 2014 |  | 1,938 × 1,647 (512 KB) | Psinha (talk | contribs) | Lisa/MX bootloader entry technique for programming via USB - DFU_UTIL. The two pairs of pins circled in red should be shorted as shown. The USB connector should then be plugged in. This action also powers the board. The board can then be flashed using ... |
You cannot overwrite this file.
File usage
The following page uses this file:
