Difference between revisions of "STLink"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
SWD can be used to upload the firmware to stm32 MCU without a bootloader. | SWD can be used to upload the firmware to stm32 MCU without a bootloader. | ||
A ST-Link is needed, any stm32-discovery board has one on it (starts @ | A ST-Link is needed, any stm32-discovery board has one on it (starts @ 8€). | ||
A standard ST-Link costs 17€ | |||
==Needed Tools== | ==Needed Tools== | ||
st_flash and st_util need to be installed, compiled from source (https://github.com/texane/stlink) | st_flash and st_util need to be installed, compiled from source (https://github.com/texane/stlink) | ||
Revision as of 17:19, 1 September 2013
SWD can be used to upload the firmware to stm32 MCU without a bootloader.
A ST-Link is needed, any stm32-discovery board has one on it (starts @ 8€).
A standard ST-Link costs 17€
Needed Tools
st_flash and st_util need to be installed, compiled from source (https://github.com/texane/stlink)