Difference between revisions of "Lia"
Jump to navigation
Jump to search
(Created page with "'''Lia''' is a lower cost stripped down version of Lisa/M. == Differences to Lisa/M == * 0.1" pitch connectors instead of molex picoblade * No CAN transceiver (footprint st…") |
(No difference)
|
Revision as of 16:21, 7 June 2012
Lia is a lower cost stripped down version of Lisa/M.
Differences to Lisa/M
- 0.1" pitch connectors instead of molex picoblade
- No CAN transceiver (footprint still present just not populated)
- No I2C2 level shifter (footprint still present just not populated)
- No 5V voltage regulator (footprint still present just not populated)
- Added servo power inline resistors (by default 0 ohm but can be changed to higher value for balancing the linear voltage regulators of the motor controllers)