Users

From PaparazziUAV
Jump to navigation Jump to search

Please add yourself to this list if you wish to share who you are and what you are doing with Paparazzi

Need help adding your information?

To have your information added by another paparazzi user, please send me an EMAIL at with the following:

  • Name
  • Email
  • Location
  • Hardware
  • Join date
  • Current activities / project status

Wiki pages

add a link to your users wiki page.

Dconger

MarcusWolschon

Alfamyke

Danstah

Martinmm

John Burt

SilaS

Mecevans

CSU-FCUAV

Pierre-Selim

martinpi

VAMK

Bernard Davison

Asia

Asia
Name Location Hardware Joined Current activities / project status
MNW China Tiny2.11 2009 Just starting,having troubles with parts.
Shubham India Tiny2.11 2009 Writing the configuration code for airframe
M Mundhra India Tiny 1.3 2007 Gain tuning on a flying wing configuration airframe
Jianlun Singapore TWOG V1 2008 trying to get TWOG onto an EasyStar. very much a newbie!
prashanth India Tiny 2.11 2008 6 autonomous flights till now, currently build a new wing like funjet
spencer Taipei, Taiwan none 2009 research for now, hope to take aerial photos of Taipei City soon

Europe

Name Location Hardware Joined Current activities / project status
SilaS Budapest Tiny 1.3 2007 Applied tiny to GWS Estarter, finished long travels in AUTO2. Now transfert it to a Twinstar and working on pairing tiny with FPV.
TomS Graz, Austria Tiny 2.11 2008 Starting to complete the wiring for the tiny and then trying to apply it to my TwinStar II.
MarkG Geneva, Switzerland Modified Tiny 2.11, EeePC as GCS, Multiplex FunJet 2008 Many successful flights.
X-MicroDrones Paris, France Tiny 2.11, Quad-Tilt-Rotor VTOL 2008 Wiring completed, first flights soon... We're trying to adapt Paparazzi to a Quad-Tilt-Rotor VTOL able to perform both airplane-like and helicopter-like flights. Working on inertial measurement units implementation.
Marcus Wolschon Freiburg, Germany Gumstix, Paraplane 2008 Porting Paparazzi to Linux-Userland with UDP-communication using mesh-networking.

UDP-Downlink working, GPS via GPSD working, Pararazzi in Linux working, Hardware still RC-only due to sensor-soldering-issues

CedricM Geneva, Switzerland Tiny 2.11, Multiplex FunJet with video camera 2008 Many successful flights working on an osd module and weather probes.
Chris Efstathiou Piraeus Hellas tiny 2.11 on a Mpx EasyGlider, TWOG 1.3 on a Boomerang turbine jet 2008 The Easyglider is fully operational, still working on the jet which had his first flight with the TWOG at 25/1/2009
FelixR Edinburgh, Scotland Booz2 quadrotor 2008 remote controlled flight, working on Kalman Filter
Rui Costa Azores, Portugal Outrunner Twinstar II with Tiny 2.11, Aerocomm datalink, 1W video tx 2008 Only ground test and software configuration.
Alan K Middlesbrough, England Tiny 2.11 & MaxStream 2008 Just starting.
Gareth R Sheffield, UK Tiny 2.11, video, bunch of helicopters, Multiplex Mentor, Multiplex Funjet, Multiplex Fox, GWS Formosa 2008 Several AUTO2 flights, currently debugging
Andrew Saenko Russia, St-Petersburg Tiny 1.13, Tiny 2.11, 2.5 kg motorised glider, 800 g plane 2007 Automatic flight, adding own code.
David "Buzz" Carlson Cyprus Tiny 2.11, Lynx EDF & GWS SloStick, 9XTend datalink 2008 Quite a few AUTO2 flights. Plane currently grounded due to a TX run-in with a 1 year-old. Currently working on getting new TX and completing CBP store setup.
Nuno Guedes Lamego, Portugal Tiny 2.11 2008 Starting
Martin Piehslinger Vienna, Austria Tiny 2.11 2008 just starting


AneMos-Group Patras, Greece Tiny 2.11, Quadrotor VTOL 2008 Working on IMU, Trying to implement Constrained Control for the quadrotor trajectory flight
Allan Ojala (VAMK) Vaasa, Finland TWOG, with AC4790 radio and LEA-5H GPS 2009 Just constructed my own first RC airplane SIG KADET.
Maik Hoepfel Berlin, Germany TWOG, Graupner Elektro Trainer S, Futaba 9C 35 Mhz August 2009 Getting started, planning to eventually use Paparazzi for a powered parachute
New User 1 2 3 4

North America

Name Location Hardware Joined Current activities / project status
Matthew Currie Nanaimo, BC Canada Tiny 13 v1.1 (Self-built) November 2006 Funjet + XBee
Paul Cox Vancouver, WA 98663 Tiny v2.11 Nov. 2008 GWS Slow Stick flying in AUTO2 reliably. Starting on stabilized video and payload drops Skype: pauldanielcox Gtalk: [use email]
John Burt wiki page Portland, Oregon Tiny v2.11 + LEA-4H (PPZUAV), Multiplex Cularis/Easystar, 9Xtend modem, T7CAP TX, ground station: EEE PC701 and/or Nokia N810 Jan 2009 Initial flight tests w/ Easystar in AUTO1 & AUTO2.


Pat O'Gara St. Paul, MN Tiny 2.11 and TWOG (PPZUAV) Oct. 2008 Completed and flown FunJet and Minimag in Auto 2. Currently rebuilding MiniMag as an improved development platform.
John Koches Muskegon, Michigan Tiny 2.11 (PPZUAV) 2007 currently flying a 48 inch zagi, 80 inch under construction.
Steve Deguir New York,New York Tiny2.11+LEA-5H (PPZUAV), XbeePro 2.4, Berg4L, JR FMA Feb 2009
David Conger San Diego (Ramona), California Tiny1.3 (PPZUAV) Sept 2007 Flying Wing MAV with onboard video. Test platform for the new 900mhz XBPro 900 RF modems.
Michael Evans Seaside(Monterey Bay), California Tiny2.11 (PPZUAV) Feb 2009 http://www.rcgroups.com/forums/showthread.php?t=1000937.
USU AggieAir Remote Sensing Logan, UT TWOG (PPZUAV) January 2009 Building 72" Flying Wings which will be used for remote sensing. Routine autonomous flight.
USU OSAM-UAV Logan, UT TWOG (PPZUAV) June 2007 2x72" 5x48" 1x60" Flying Wings. Research backyard for AggieAir Remote Sensing. Routine autonomous flight.
CSU Fuel Cell UAV Fort Collins, Co Tiny 2.11 + LEA-5H (PPZUAV), 2.4Ghz XBPro Mar 2009 Maiden flight complete Feb 28. New Airframe in development.
Armen Gharibans La Jolla, California Tiny2.11 (PPZUAV) March 2009 UCSD Project with Multiplex Mentor. Completed August 2, 2009. Several Successful Auto2 Flights. A LOT of help from David Conger.
New User 1 2 3 4

Central America

Name Location Hardware Joined Current activities / project status
Joekadet David Panama' Tiny v2.11/LEA-4P, RF Modems XBee Pro 2.4 GHz (PPZUAV). Multiplex Mentor 2008 Seven flights now. Flights 6 & 7 in Auto2. Now only a matter of fine tuning.
New User 1 2 3 4


Australia

Name Location Hardware Joined Current activities / project status
Todd Sandercock Adelaide, SA Tiny v2.11, Multiplex Twinjet, 9Xtend modems Jan 2008 Completed successful flight testing. Now designing new airframe.
Reuben Brown Gawler, SA Tiny v2.11 May 2009 Getting the autopilot set up
Bernard Davison Neutral Bay, NSW Tiny v2.11, Vertical + Horizontal IR sensors, XBee PRO modems, Futaba T6EXAP TX, Futaba R136F RX, Funjet, MacBook laptop August 2008 Configuring before first flight.
Chris Gough Canberra TWOG v2.11, EZ* September 09 not yet airborn


Africa

Name Location Hardware Joined Current activities / project status
W1th South Africa KZN TWOG V1 ,LEA-5H GPS , RF Modems XBee Pro 868 (CheBuzz) July 2009 New to this , Got TWOG,GPS etc interfacing with Laptop and working ..Made a website SCARF of my struggle ...