From PaparazziUAV
Revision as of 12:59, 29 April 2016 by Esden (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Also see writing udev rules.

Please see paparazzi naming description for understanding why do we need udev rules.

You can get the serial number of your FTDI usb/serial converter connected to your xbee via

udevadm info --query=all --attribute-walk --name=/dev/ttyUSB0

and looking for the lines

ATTRS{product}=="FT232R USB UART"

where the last one would be your serial you need to write into the rules file, e.g.

# your own XBee ground modem with FTDI USB adapter (adapt serial number)
SUBSYSTEM=="tty", ATTRS{product}=="FT232R USB UART", ATTRS{serial}=="A80081ej", SYMLINK+="paparazzi/xbee", GOTO="tty_FTDI232_end"

To see what udev rules would match (It may show incorrect results, because some values may be different, or not available at a simulation run.)

udevadm test --action=add $(udevadm info --query=path --name /dev/ttyUSB0)

To actually retrigger without having to re-plug it:

sudo udevadm trigger

To reload the udev rules without rebooting your computer:

sudo udevadm control --reload-rules


udev rule for the floss-jtag serial interface (will then be accessible under /dev/jtag-serial)

SUBSYSTEM=="tty", ATTRS{interface}=="FLOSS-JTAG", ATTRS{bInterfaceNumber}=="01", SYMLINK+="jtag-serial"

udev rule foe the BlackMagicProbe serial interface (will then be accessible under /dev/bmp-serial)

SUBSYSTEM=="tty", ATTRS{interface}=="Black Magic UART Port", SYMLINK+="bmp-serial"