Tiny GPS config
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Prerequisites:
- Must have loaded USB Boot Loader software
- Must have loaded "tunnel"
- Must have downloaded and installed u-center
- Must have downloaded, uncompressed the LEA-4P config file
Required Cables:
FTDI Serial Adapter Cable
8-pin Molex Picoblade connector to 6-pin FTDI cable
Steps:
- Connect FTDI Cable + 8-pin Molex adapter to USB on your laptop
- Connect 8-pin Molex to "serial1" on Tiny2.11
- Power on Tiny2.11
- Start u-center application
- set connection 'baudrate' to 9600BPS (LEA-4P factory default)
- Menu: Tools/GPS Config select the file to upload (LEA-4P file downloaded)
- Click File >> GPS button to send the file to the GPS
- About 2/3 the way through it will stop. At this point change 'baudrate' to 38,4000 connection and it will continue and finish