TU Delft - Lasergame with Autonomous AR Drone

From PaparazziUAV
Jump to navigation Jump to search
TU Delft Minor Robotics: Quadrotor Group 2

Introduction

Our focus in the development of the autonomous AR.Drone is focused on the lasergaming industry. In this field our goal is to implement the AR.drone as a observing and later on in the project participating member of the game. We feel that there is quite a lot of potential for an implementation of the quad rotor, because we believe that using it we can create a new dimension in laser gaming. With its manoeuvrability it will be able to easily get around the laser game obstacle course and its futuristic looks will integrate perfectly with the laser game environment.


In our project we have chosen to work with the Standard Development Kit (SDK), which is already present on the AR.Drone. To get this done we needed to combine Paparazzi with the programs JSBSim and FlightGear.

Github

For this project we used a repository, Github. Developers often use a repository for developing their software projects. When using a repository, developers can upload and download the code developed for the project. This allows multiple people to work on the same project at the same time without getting in eachother's way. It is in this case very useful and we will use Github, a populair open source repository site. For beginners, please read the manual to setup Github for Ubuntu:

The Laser Gaming Setup

The exact way in which we are going to implement the AR.Drone in the laser gaming industry will be decided later on in the process. We currently have four options, varying in difficulty and achievability:

  • Enemy: The AR.Drone will be used as an interactive, shooting player that can be shot as well, possibly working in teams of multiple quad rotors
  • Scout: The AR.Drone will survey a certain area streaming back its video, allowing players to know where enemies are
  • Mine-deployer: To allow for a more fast-paced game the AR.Drone will find a player and hover around its position. It will then begin counting down, which means the player needs to move or risk getting hit by the virtual explosion of the AR.Drone
  • Observer: As there are nearly always people waiting while other people are playing, the AR.Drone can be used as a tool to live-stream the current game to a beamer for everyone to see. Games could also be taped and watched by the players after the game is over, and could even be sold


Implementation

During the test phase we want to have an adjustable system that we can tweak while working. This is the reason that we made a PIC based design. For testing we are going to use a system based on the RC-5 protocol by Phillips. The RC-5 protocol is used for remote controls. We are going to use it for sending and receiving information about the players.

Simulation

Model

Combining Paparazzi with FlightGear and JSBSim

To get the AR.Drone to fly autonomously a model of the system is required. This can be created using paparazzi combined with JSBSim and FlightGear. A more detailed explanation of how we did this can be found here: Setting up simulation environment.

Getting information

Getting Started

This project is developed by using Linux, ubuntu. Following these steps are at your own risk. You can only perform these steps if you use ubuntu. Before the developing part will start, the following installations are required:

  • Download the SDK from Ardrone.org
  • Download and install Paparazzi, see the installation guide for help: [1] Do not follow the instructions from 4), we use another cross-compiler for this project.
  • Follow the instructions described in the "Getting the cross-compiler".

The cross-compiler

  1. Download the cross-compiler from [2]
  2. Open the terminal and direct to your home directory.
  3. Type the following commands (without the $):
$ sudo chmod +x codesetup.sh
$ sudo ./codesetup.sh

Wait a few minutes and you're done!

AT Commands

The AR.Drone 2 has a self made protocol for controlling the AR.Drone 2 remotly over wifi. More information can be found at AT Commands AR.Drone 2.

Navdata

The AR.Drone 2 also has a self made protocol for sending navdata to the client over wifi. More information can be found at Navdata AR.Drone 2.

GPS signals

Telnet

The AR.Drone 2 has a telnet interface that opens a root shell on the AR.Drone 2, which is needed to test and install software. More information can be found at Telnet AR.Drone2.

FTP

The AR.Drone 2 also has a FTP server running, which makes it possible to upload files like programs to the AR.Drone 2. More information can be found at FTP AR.Drone2.

Programming

Airframe

AT-Commands

Using the GPS signals

Manuals and guides