Difference between revisions of "Roadmap"

From PaparazziUAV
Jump to: navigation, search
(Hardware Support)
(Roadmap)
Line 9: Line 9:
 
* ChibiOS HAL
 
* ChibiOS HAL
 
* Common navigation/waypoint/flight plan API between fixedwing and rotorcraft.
 
* Common navigation/waypoint/flight plan API between fixedwing and rotorcraft.
 +
* Merging [[subsystems]] and [[modules]] capabilities (and for easier airframe configuration)
  
 
* Cleaning and improving the communication system
 
* Cleaning and improving the communication system

Revision as of 11:23, 16 February 2016

Roadmap

Where is Paparazzi heading?

  • Use sw/tools/generators/gen_autopilot to generate state machines from conf/autopilot/*.xml files.
    -> easier to add new modes, control loops...
  • Use ABI to publish all sensor data (accel, gyro, mag, gps), already done for baro, sonar, temp...
  • Refactoring of AHRS/INS algos to subscribe to ABI messages and possibility to run multiple at the same time.
  • Dual-MCU support for rotorcrafts (one FlyByWire and one AutoPilot MCU).
  • ChibiOS HAL
  • Common navigation/waypoint/flight plan API between fixedwing and rotorcraft.
  • Merging subsystems and modules capabilities (and for easier airframe configuration)
  • Cleaning and improving the communication system
    • Improvements of the message protocol
    • Cleaning of the standard set of messages (see messages branch)
    • Support of MAVLINK
    • Support of I2C/SPI/CAN as generic physical devices (UART/SDIO done)
    • Message/protocol versions

Hardware Support

The Paparazzi Community is actively developing your hardware and autopilot boards (Apogee, Lisa/S/MX, Krooz,...). New developments are already on the way, including:

  • Beagle Bone Black autopilot cap
  • Wider version of Apogee

Work is being done at this very moment to providing full or partial support for third-party hardware and autopilots such as:

  • Parrot's ARDrone2 and Bebop
  • The Pixhawk PX4FMU and it's PX4IO board (Support of this hardware is in the works)
  • The Pixhawk's Pixhawk (Support of this hardware is in the works)

It would be great if you could help in whatever way to get it up and flying...see the delelopers documentation. Or clone Paparazzi and do a pull request of your improvments and additions.

General Release Policy

Currently, 2 stable versions are released every year, usually around July and December. We are planing to increase the number of releases per year in order to reduce the gap between to stable versions. It should make it easier to end-user to update their configuration files, while staying closer to the development code.