Difference between revisions of "FunJet"

From PaparazziUAV
Jump to navigation Jump to search
 
(One intermediate revision by one other user not shown)
Line 9: Line 9:
|}
|}


On the contrary, body-shaping underwear can be easily worn as it does the work of [http://www.dofiberone.com Fiberglass planter] hiding body fats and adjusting our body muscles without any effort on part of the person wearing them.
== Features ==


The development of body shaping [http://www.ck-wholesale.com Calvin klein] can be traced back to near the beginning of twentieth century when people, mainly women started becoming anxious about their body shape and figure. Most women did not have any clue of how to lose weight or how to get nice physique.
* Suggested Retail Price of $65 USD
 
* Elapor Particle Foam construction
However, they knew one way of weight control. This simple way was to try tight hkfverg undergarments that can ensure the reduction of fat on belly and hip area. This development [http://www.ck-wholesale.com underwear] in the end gave way to use of body shaping calvin klein.
* Assembles in minutes with only Medium CA glue
 
* Fiberglass Wing Spar
Thus, body-shaping underwear gained popularity from 1940s to 1960s. During those times, body-shaping underwear was available in different shapes and sizes, for men and women both. This underwear was then replaced by dieting and exercise, etc. People started to use weight-losing medicines in order to achieve an ideal shape of the body. They were advised to do yoga, aerobics and different other types of precautions in order to [http://www.ck-wholesale.com calvin klein underwear] maintain their body shape and weight.
* Moderately priced
 
* Detachable canopy for access to internals
After that, body-shaping underwear got back some fame once again in the 1990s. The basis for this unexpected fame was the evident distress over the use of heavy exercises in order to lose weight. In addition, people did not have much time to carry on doing heavy set of exercises for hours every day. People were looking for an easy method to get rid of weight and grow nice body figure.
* Plastic Motor Mount
 
* Wide flight speed envelope (slow without stalling, through fast)
The latest body shaping underwear is wrgdhui completely dissimilar from the previous generation ones. They are available now with scientific alignment of elastics and [http://www.weipuconnector.com/waterproof-connectors.html waterproof connectors] fabrics and measurement used in the underwear. Even swimming and bathing suits are coming with body shaping features. Body shaping underwear is available at low price and proving to be extremely useful in body reshaping and fat management. Keeping in view rising pediatric obesity, [http://www.iscaffold.com.cn scaffolding] body-shaping underwear is also available for kids.


== Specifications ==
== Specifications ==
Line 166: Line 165:
* Motor Screws (to hold plastic motor plate to plastic motor cowl) are slot head and appear to be 3.0mm x 0.5mm (thread) x 16mm long
* Motor Screws (to hold plastic motor plate to plastic motor cowl) are slot head and appear to be 3.0mm x 0.5mm (thread) x 16mm long
* Screws for AXI "outrunner" motor are 3.0mm Diameter x 0.5mm Thread x 6 mm Length
* Screws for AXI "outrunner" motor are 3.0mm Diameter x 0.5mm Thread x 6 mm Length
[[Category:Airframes]]

Latest revision as of 19:06, 9 March 2011

<< Back to Airframes


Multiplex FunJet

The MultiPlex FunJet is an electric pusher-prop jet made of very durable Elapor Particle Foam Construction. It offers plenty of room internally for avionics in an attractive package.

Features

  • Suggested Retail Price of $65 USD
  • Elapor Particle Foam construction
  • Assembles in minutes with only Medium CA glue
  • Fiberglass Wing Spar
  • Moderately priced
  • Detachable canopy for access to internals
  • Plastic Motor Mount
  • Wide flight speed envelope (slow without stalling, through fast)

Specifications

  • Wingspan: 31.29" (795mm)
  • Wing Area: 232 sq in (15 sq dm)
  • Weight: 21oz (620g) _all up_
  • Weight w/o powerplant (for estimation): 330g
  • Bare weight: 165g
  • Length: 29.52" (750mm)
  • Airfoils: Airfoil: Semi-symmetrical, mid wing at the fuselage sides

Payload Area

  • Fuselage is 1.60" (40.6mm) wide x 20" long

Recommended Setups

Manufacturer Recommendation

Remember this is a hot sport plane so the manufacturers recommendation reflects typical desired performance and may not be the best match for UAV operations.

  • Motor: Himax HB2815-3000 Brushless Motor
  • Battery: 3S1P 2100-3200mah LiPo
  • Servos: 2 Nano sized (HS-55)

Group Member Setups

Martin

  • Motor: AXI 2212/26
  • Battery: 3S1P 2100mAh LiPo
  • Prop: 9x6


Matthew Currie

Multiplex FunJet
Multiplex FunJet
Multiplex FunJet
  • Motor: AXI 2212/26
  • Battery: LiPower Lites 3S1P 2100mAh 18C LiPo
  • Prop: APC 9x6E (checked to draw ~ 11.5A)
  • Receiver: Berg 4L
  • Servos: 2x Hitec HS-55


ENAC Team

ENAC Team special setup Multiplex FunJet
ENAC Team special setup Multiplex FunJet


Servos

Multiplex calls for 2 Hitec HS-55 or 2 HS-65 servos

Hitec HS-55

  • MSRP: $13 USD
  • Torque: 13/16 oz/in @ 4.8/6.0v
  • Speed: 0.09/0.08 seconds/ 60deg @ 4.8/6.0v
  • Weight: 0.29 oz (7.8g)
  • Size: 0.9 x 0.46 x 0.95"

Hitec HS-65HB

  • MSRP:
  • Motor Type: 3 Pole Ferrite
  • Bearing Type: Top Ball Bearing
  • Torque 4.8/6.0v: 22 / 26 oz (1.6 / 1.9 kg.)
  • Speed 4.8/6.0v: 0.16 / 0.13 second
  • Size: 0.9"x 0.5"x 0.9" (24 x 12 x 24m)
  • Weigh : 0.39oz. 11.2 g.

Recommended Motors

Himax HB2815-3000 Brushless Motor

PDF Datasheet

  • MSRP $69.95 USD
  • Dimensions: 27mm x 38mm
  • Weight: 86g
  • KV: 3000
  • Max Amps: 30A
  • Max Watts: 275W

AXI 2212/26

http://www.modelmotors.cz/index.php?page=61&product=2212&serie=26&line=GOLD

MSRP $69.95 USD

  • Dimensions: 1-3/32" diameter, 1-3/16" case length, 3.17mm (1/8") shaft
  • Weight: 57 g
  • KV: 920
  • Max Amps: 12A
  • Max Watts: 275W
  • Prop's:

9x6, 24.5 ounce thrust, 14:12 full throttle.

8x6, 19.5 ounce thrust, 19:38 full throttle.

Funjet Back Plate Construction

Funjet back plate construction components
  • A suitable precursor for the back plate is 5mmx75mmx75mm balsa sandwiched by 1mmx75mmx75mm plywood. The laminating adhesive used was PVA glue. The sandwich was left to dry overnight clamped by similar size wooden plates in a vice.
  • An outline of The 7mm elapor profile, cut from the back of the Funjet canopy, is drawn in a CAD/CAM program.
  • A laser cutting firm transferred this outline to CorelDraw and cut an acrylic (Perspex) template.
  • The balsa/plywood sandwich was attached by double sided tape to the acrylic template and the correct outline achieved by routing around the acrylic border.
Funjet back plate fitted
Tiny v2.1 in a Funjet
  • The fitted plate looks remarkably similar to that displayed in the image on the right found on the main page of the wiki.

Online Discussion on FunJet topics

Photos

Included Motor Mount
Example of high visibility paint job
Idea for wing tip skid

Misc Notes