Difference between revisions of "FlightGear"
m (Added link) |
|||
| Line 24: | Line 24: | ||
sudo apt-get update | sudo apt-get update | ||
sudo apt-get install flightgear | sudo apt-get install flightgear | ||
==== From source ==== | |||
A great page to read in case you want to install Flightgear from source [http://wiki.flightgear.org/Scripted_Compilation_on_Linux_Debian/Ubuntu can be found here] | |||
== Adding Paparazzi models == | == Adding Paparazzi models == | ||
Revision as of 07:50, 9 July 2013
FlightGear Flight Simulator.
See http://www.flightgear.org/
Installation
Debian/Ubuntu
The standard Debian/Ubuntu repositories contain FlightGear 2.4 or 2.6.
Flightgear 2.8 was available from getdeb.net (now discontinued, you can still use the mirrors). In this example for Ubuntu 12.04 precise, replace the codename as appropriate:
Add the key:
wget -q -O - http://mirrors.dotsrc.org/getdeb/ubuntu/dists/precise-getdeb/Release.gpg | sudo apt-key add -
Add to your /etc/apt.sources.list:
deb http://mirrors.dotsrc.org/getdeb/ubuntu precise-getdeb games deb-src http://mirrors.dotsrc.org/getdeb/ubuntu precise-getdeb games
Install flightgear:
sudo apt-get update sudo apt-get install flightgear
From source
A great page to read in case you want to install Flightgear from source can be found here
Adding Paparazzi models
There are a few new models that come with paparazzi:
- mikrokopter.xml quadrotor frame
- hexa.xml hexacopter
- simple_bipe.xml biplane/quadrotor hybrid (transitioning vehicle)
To make them available in flightgear, make a link from /usr/share/games/flightgear/Models/Aircraft/paparazzi to <paparazzi_dir>/conf/simulator/flightgear/
sudo ln -s $PAPARAZZI_SRC/conf/simulator/flightgear/ /usr/share/games/flightgear/Models/Aircraft/paparazzi
Using FlightGear for Visualization
For Flight Gear visualization of the simulation, version 2.6 or greater is best. If you wish to use version 2.4 or lower, you must add the following to the firmware section of your airframe file:
| File: conf/airframes/myplane.xml |
<firmware name="fixedwing or rotorcraft">
...
<define name="FG_2_4" value="1"/>
...
</firmware>
|
- Launch Flight Gear with the following command:
fgfs --fdm=null --native-gui=socket,in,30,,5501,udp
or to e.g. use the mikrokopter quadrotor model:
fgfs --fdm=null --native-gui=socket,in,30,,5501,udp --prop:/sim/model/path=Models/Aircraft/paparazzi/mikrokopter.xml