File:LisaMX v2 0 DFU.jpg

From PaparazziUAV
Revision as of 18:22, 18 November 2014 by Psinha (talk | contribs) (Lisa/MX bootloader entry technique for programming via USB - DFU_UTIL. The two pairs of pins circled in red should be shorted as shown. The USB connector should then be plugged in. This action also powers the board. The board can then be flashed using ...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Original file ‎(1,938 × 1,647 pixels, file size: 512 KB, MIME type: image/jpeg)

Lisa/MX bootloader entry technique for programming via USB - DFU_UTIL. The two pairs of pins circled in red should be shorted as shown. The USB connector should then be plugged in. This action also powers the board. The board can then be flashed using DFU-UTIL. Tested functional on a TRI Lisa/M v2.0 using Paparazzi Master branch on 18 Nov 2014.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current18:22, 18 November 2014Thumbnail for version as of 18:22, 18 November 20141,938 × 1,647 (512 KB)Psinha (talk | contribs)Lisa/MX bootloader entry technique for programming via USB - DFU_UTIL. The two pairs of pins circled in red should be shorted as shown. The USB connector should then be plugged in. This action also powers the board. The board can then be flashed using ...

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "http://wiki.paparazziuav.org/w/index.php?title=File:LisaMX_v2_0_DFU.jpg&oldid=19162"