User:Marc - Revision history

Marc: add picture of assembly

2013-04-09T21:39:48Z

add picture of assembly

← Older revision		Revision as of 15:39, 9 April 2013
Line 27:		Line 27:

	* '''Mentor'''		* '''Mentor'''
	** Using homebuilt paparazzi (see below)		** Using homebuilt paparazzi (see Hardware section below)
	** Used for photo missions with Canon camera and CHDK trigger

	{\|		{\|
	\|[[Image:Mentor_cam.jpg\|thumb\|300px\|~~Easystar with sensors~~]]		\|[[Image:Mentor inside.JPG\|thumb\|300px\|Paparazzi mounting in Mentor]]
			\|
			\|
			\|}

			* Used for photo missions with Canon camera and CHDK trigger

			{\|
			\|[[Image:Mentor_cam.jpg\|thumb\|300px\|Camera on Mentor]]
	\|		\|
	\|		\|

Marc: Update

2013-03-05T22:04:11Z

Update

← Older revision		Revision as of 16:04, 5 March 2013
Line 1:		Line 1:
	== About me ==		== About me ==
	* Name: Marc Schwarzbach		* Name: Marc Schwarzbach
	* Location: ~~Stuttgart~~, Germany		* Location: Munich, Germany
	* PhD ~~student~~ in aerospace engineering		* PhD in aerospace engineering
	* RC flying for many years, Paparazzi since 2008		* RC flying for many years, Paparazzi since 2008
	* Member of '''[http://www.akamodell.de Akamodell Stuttgart]''' (Projects like '''[http://www.akamodell.de/acc2009 Aircargo]''', 9kg payload with a 2,2kg aircraft and 450W)		* Member of '''[http://www.akamodell.de Akamodell Stuttgart]''' (Projects like '''[http://www.akamodell.de/acc2009 Aircargo]''', 9kg payload with a 2,2kg aircraft and 450W)
Line 14:		Line 14:
	**Rudder is enlarged for better control.		**Rudder is enlarged for better control.
	**Tiny V2		**Tiny V2
	**~~Now testbed~~ for homebuilt paparazzi (see below)		**Testbed for homebuilt paparazzi (see below)
			**Retired after research flights in Namibia

			{\|
			\|[[Image:Easystar_marc.jpg\|thumb\|300px\|Easystar with sensors]]
			\|
			\|
			\|}

	* '''FunJet'''		* '''FunJet'''
	**~~Not flown yet~~ (~~16:55, 18 February 2010 (CET)~~)		**Flying regularly with Tiny V2

			* '''Mentor'''
			** Using homebuilt paparazzi (see below)
			** Used for photo missions with Canon camera and CHDK trigger

	{\|		{\|
	\|[[Image:~~Easystar_marc~~.jpg\|thumb\|300px\|Easystar with sensors]]		\|[[Image:Mentor_cam.jpg\|thumb\|300px\|Easystar with sensors]]
	\|		\|
	\|		\|
	\|}		\|}

	=== For the university ===		* '''Easystar V2'''
			** Testbed for LisaM2


			=== At work / For the university ===
	:'''[http://www.irs.uni-stuttgart.de/uav UAV at university of stuttgart]''' (Sorry, only german for now)		:'''[http://www.irs.uni-stuttgart.de/uav UAV at university of stuttgart]''' (Sorry, only german for now)
	'''[[Adler_Uni_Stuttgart\|Wiki Page]]'''		'''[[Adler_Uni_Stuttgart\|Wiki Page]]'''
Line 50:		Line 65:
	\|}		\|}

			* '''Multi UAV research in Canada'''
			**Collision simulation for sensor tests with several Paparazzi planes
			**Ultra-Stick airplanes
			**Design and construction of a 5kg class UAV

			{\|
			\|[[Image:Ultrastick_pprz.jpg\|thumb\|250px\|Ultrastick plane]]
			\|[[Image:Ultrastick_fleet.jpg\|thumb\|250px\|Fleet of planes]]
			\|[[Image:5kg_pprz.jpg\|thumb\|250px\|5kg class UAV]]
			\|
			\|}


			== Hardware / Software ==
			=== SD-Card data logger ===

	~~== Hardware ==~~
	* SD-Card data logger
	**Intention as '''[[Data_Logger\|Data Logger]]''' and compatible but based on Atmel (cheaper and more familiar to me)		**Intention as '''[[Data_Logger\|Data Logger]]''' and compatible but based on Atmel (cheaper and more familiar to me)
	**Description and files to be released when tested		**Description and files to be released when tested
Line 65:		Line 93:
	\|}		\|}

	*Homebuilt Paparazzi System		=== Homebuilt Paparazzi System ===
	**Based on the idea of [https://www.ismo.hs-bremen.de/dokuwiki/doku.php?id=elem:projekte:projekt19:pcb:intro Hochschule Bremen] using an [http://www.olimex.com/dev/lpc-h2148.html Olimex developement board]		**Based on the idea of [https://www.ismo.hs-bremen.de/dokuwiki/doku.php?id=elem:projekte:projekt19:pcb:intro Hochschule Bremen] using an [http://www.olimex.com/dev/lpc-h2148.html Olimex developement board]
	**Single layer pcb layout, produced with a CNC mill using [http://www.pcbgcode.org/ PCB-GCode]		**Single layer pcb layout, produced with a CNC mill using [http://www.pcbgcode.org/ PCB-GCode]
Line 82:		Line 110:
	\|[[Image:IRdual_Marc.jpg\|thumb\|300px\| IR dual sensor]]		\|[[Image:IRdual_Marc.jpg\|thumb\|300px\| IR dual sensor]]
	\|}		\|}

			=== ADS-B Receiver based on USB-SDR stick ===
			*Tool for adding intruder aircraft to the GCS and the uplink '''[[ADS-B\|Wiki Page ADS-B]]'''

Marc: adding/correcting links

2010-03-25T20:18:47Z

adding/correcting links

← Older revision		Revision as of 14:18, 25 March 2010
Line 4:		Line 4:
	* PhD student in aerospace engineering		* PhD student in aerospace engineering
	* RC flying for many years, Paparazzi since 2008		* RC flying for many years, Paparazzi since 2008
			* Member of '''[http://www.akamodell.de Akamodell Stuttgart]''' (Projects like '''[http://www.akamodell.de/acc2009 Aircargo]''', 9kg payload with a 2,2kg aircraft and 450W)


Line 17:		Line 18:
	* '''FunJet'''		* '''FunJet'''
	**Not flown yet (16:55, 18 February 2010 (CET))		**Not flown yet (16:55, 18 February 2010 (CET))
	~~:'''[[FunJet\|General info]]'''~~

	{\|		{\|
Line 26:		Line 26:

	=== For the university ===		=== For the university ===
	:'''[http://www.irs.uni-stuttgart.de/uav UAV at university of stuttgart]''' (Sorry, only german for now~~. Will add page here~~)		:'''[http://www.irs.uni-stuttgart.de/uav UAV at university of stuttgart]''' (Sorry, only german for now)
			'''[[Adler_Uni_Stuttgart\|Wiki Page]]'''
	* '''Easyglider Pro'''		* '''Easyglider Pro'''
	**Gain of 4000m altitude in one flight [http://diydrones.com/xn/detail/705844:Comment:121725?xg_source=activity DIY-Drones Contest]		**Gain of 4000m altitude in one flight [http://diydrones.com/xn/detail/705844:Comment:121725?xg_source=activity DIY-Drones Contest]
Line 67:		Line 68:
	**Based on the idea of [https://www.ismo.hs-bremen.de/dokuwiki/doku.php?id=elem:projekte:projekt19:pcb:intro Hochschule Bremen] using an [http://www.olimex.com/dev/lpc-h2148.html Olimex developement board]		**Based on the idea of [https://www.ismo.hs-bremen.de/dokuwiki/doku.php?id=elem:projekte:projekt19:pcb:intro Hochschule Bremen] using an [http://www.olimex.com/dev/lpc-h2148.html Olimex developement board]
	**Single layer pcb layout, produced with a CNC mill using [http://www.pcbgcode.org/ PCB-GCode]		**Single layer pcb layout, produced with a CNC mill using [http://www.pcbgcode.org/ PCB-GCode]
	**Changed layout of infrared sonsors for ~~easyser~~ soldering and components available at my electronic retailer		**Changed layout of infrared sonsors for easyer soldering and components available at my electronic retailer
	**Testflight today: success! (23:13, 24 February 2010 (CET))		**Testflight today: success! (23:13, 24 February 2010 (CET))
	**Not very efficient(7805...), light, small or beautiful, but it works		**Not very efficient(7805...), light, small or beautiful, but it works
Line 76:		Line 77:
	\|[[Image:Plugged_in.jpg\|thumb\|250px\| The "big TWOG" :-)]]		\|[[Image:Plugged_in.jpg\|thumb\|250px\| The "big TWOG" :-)]]
	\|[[Image:Adapter_a.jpg\|thumb\|250px\| pcb side]]		\|[[Image:Adapter_a.jpg\|thumb\|250px\| pcb side]]
			\|}
			{\|
	\|[[Image:IRsingle_Marc.jpg\|thumb\|300px\| IR single sensor]]		\|[[Image:IRsingle_Marc.jpg\|thumb\|300px\| IR single sensor]]
	\|[[Image:IRdual_Marc.jpg\|thumb\|300px\| IR dual sensor]]		\|[[Image:IRdual_Marc.jpg\|thumb\|300px\| IR dual sensor]]
	\|}		\|}

Marc at 22:13, 24 February 2010

2010-02-24T22:13:14Z

@@ Line 13: / Line 13: @@
 **Rudder is enlarged for better control.
 **Tiny V2
 * '''FunJet'''
@@ Line 61: / Line 62: @@
 |[[Image:EEEPPRZ.jpg|thumb|300px|EEEPC running GCS]]
+|
 |}

Marc at 20:45, 18 February 2010

2010-02-18T20:45:54Z

← Older revision		Revision as of 14:45, 18 February 2010
Line 1:		Line 1:
	== About me ==		== About me ==
			* Name: Marc Schwarzbach
	* Location: Stuttgart, Germany		* Location: Stuttgart, Germany
	* PhD student in aerospace engineering		* PhD student in aerospace engineering
Line 56:		Line 57:

	{\|		{\|
	\|[[Image:SDlogger_top.jpg\|thumb\|250px\|SD logger top]]		\|[[Image:SDlogger_top.jpg\|thumb\|250px\|SD logger prototype top]]
	\|[[Image:SDlogger_bot.jpg\|thumb\|250px\|SD logger bottom]]		\|[[Image:SDlogger_bot.jpg\|thumb\|250px\|SD logger bottom]]
	\|[[Image:EEEPPRZ.jpg\|thumb\|300px\|EEEPC running GCS]]		\|[[Image:EEEPPRZ.jpg\|thumb\|300px\|EEEPC running GCS]]
	\|		\|
	\|}		\|}

Marc at 20:43, 18 February 2010

2010-02-18T20:43:11Z

← Older revision		Revision as of 14:43, 18 February 2010
Line 8:		Line 8:

	=== Private ===		=== Private ===
	* Easystar		* '''Easystar'''
	**Using standard brushed motor with 3S Lipo, no problems after many flight hours.		**Using standard brushed motor with 3S Lipo, no problems after many flight hours.
	**Rudder is enlarged for better control.		**Rudder is enlarged for better control.
	**Tiny V2		**Tiny V2

	* FunJet		* '''FunJet'''
	**Not flown yet (16:55, 18 February 2010 (CET))		**Not flown yet (16:55, 18 February 2010 (CET))
	:'''[[FunJet\|General info]]'''		:'''[[FunJet\|General info]]'''
Line 25:		Line 25:
	=== For the university ===		=== For the university ===
	:'''[http://www.irs.uni-stuttgart.de/uav UAV at university of stuttgart]''' (Sorry, only german for now. Will add page here)		:'''[http://www.irs.uni-stuttgart.de/uav UAV at university of stuttgart]''' (Sorry, only german for now. Will add page here)
	* Easyglider Pro		* '''Easyglider Pro'''
	**Gain of 4000m altitude in one flight [http://diydrones.com/xn/detail/705844:Comment:121725?xg_source=activity DIY-Drones Contest]		**Gain of 4000m altitude in one flight [http://diydrones.com/xn/detail/705844:Comment:121725?xg_source=activity DIY-Drones Contest]
	**Tiny V2		**Tiny V2
	* Trainer		* '''Trainer'''
	**Wingspan 3,3m; 2kW motor; 10S2P Lipo; 12 kg		**Wingspan 3,3m; 2kW motor; 10S2P Lipo; 12 kg
	**Used for pilot training and payload testing		**Used for pilot training and payload testing
	**Tiny V2		**Tiny V2
	* Adler 1		* '''Adler 1'''
	**Wingspan 4,3m; 2x2kW motor; 2x10S2P Lipo; maximum take off 25kg (for legal reasons)		**Wingspan 4,3m; 2x2kW motor; 2x10S2P Lipo; maximum take off 25kg (for legal reasons)
	**Used for aerial imaging and remote sensing		**Used for aerial imaging and remote sensing
	**Twog		**Twog
	* Adler 2		* '''Adler 2'''
	**Similar to Adler1, lightweight structure for the fuselage		**Similar to Adler1, lightweight structure for the fuselage
	**Manual flights performed, Paparazzi system implemented but not tested due to bad weather (16:55, 18 February 2010 (CET)).		**Manual flights performed, Paparazzi system implemented but not tested due to bad weather (16:55, 18 February 2010 (CET)).

Marc at 15:55, 18 February 2010

2010-02-18T15:55:37Z

New page

== About me ==
* Location: Stuttgart, Germany
* PhD student in aerospace engineering
* RC flying for many years, Paparazzi since 2008

== Planes equipped with Paparazzi ==

=== Private ===
* Easystar
**Using standard brushed motor with 3S Lipo, no problems after many flight hours.
**Rudder is enlarged for better control.
**Tiny V2

* FunJet
**Not flown yet (16:55, 18 February 2010 (CET))
:'''[[FunJet|General info]]'''

{|
|[[Image:Easystar_marc.jpg|thumb|300px|Easystar with sensors]]
|
|
|}

=== For the university ===
:'''[http://www.irs.uni-stuttgart.de/uav UAV at university of stuttgart]''' (Sorry, only german for now. Will add page here)
* Easyglider Pro
**Gain of 4000m altitude in one flight [http://diydrones.com/xn/detail/705844:Comment:121725?xg_source=activity DIY-Drones Contest]
**Tiny V2
* Trainer
**Wingspan 3,3m; 2kW motor; 10S2P Lipo; 12 kg
**Used for pilot training and payload testing
**Tiny V2
* Adler 1
**Wingspan 4,3m; 2x2kW motor; 2x10S2P Lipo; maximum take off 25kg (for legal reasons)
**Used for aerial imaging and remote sensing
**Twog
* Adler 2
**Similar to Adler1, lightweight structure for the fuselage
**Manual flights performed, Paparazzi system implemented but not tested due to bad weather (16:55, 18 February 2010 (CET)).
**Twog

{|
|[[Image:EasyGl.jpg|thumb|300px|Easyglider Pro]]
|[[Image:Adler1_a.jpg|thumb|300px|Adler1 ready for lift off]]
|
|}

== Hardware ==
* SD-Card data logger
**Intention as '''[[Data_Logger|Data Logger]]''' and compatible but based on Atmel (cheaper and more familiar to me)
**Description and files to be released when tested

* GCS on EEEPC 900 running Debian Linux from SD-Card [http://wiki.debian.org/DebianEeePC DebianEeePC]

{|
|[[Image:SDlogger_top.jpg|thumb|250px|SD logger top]]
|[[Image:SDlogger_bot.jpg|thumb|250px|SD logger bottom]]
|[[Image:EEEPPRZ.jpg|thumb|300px|EEEPC running GCS]]
|
|}