Tiny v2 - Revision history

P0rc0 r0ss0: Redirecting to Tiny/v2.11

2011-12-11T08:35:31Z

Redirecting to Tiny/v2.11

Aerovista: /* Feature additions : Tiny 2.1 vs Tiny 1.1 */

2011-08-05T09:08:12Z

Feature additions : Tiny 2.1 vs Tiny 1.1

← Older revision		Revision as of 03:08, 5 August 2011
Line 54:		Line 54:
	* 5V switching power supply		* 5V switching power supply
	::The Texas Instruments [http://focus.ti.com/docs/prod/folders/print/pth08080w.html PTH08080WAH] switching 5V/2.25A integrated power supply module greatly simplify manufacturing, reduce costs, and improve performance.		::The Texas Instruments [http://focus.ti.com/docs/prod/folders/print/pth08080w.html PTH08080WAH] switching 5V/2.25A integrated power supply module greatly simplify manufacturing, reduce costs, and improve performance.
	::Tiny v2.1 have a voltage input range of 6.1V → 18V and enough 5V power for servos, high-power modems and video systems. Be careful using ~~large~~ or digital servos consuming a lot of current. If you use four or more of them on your airframe it is recommended to supply them separately.		::Tiny v2.1 have a voltage input range of 6.1V → 18V and enough 5V power for servos, high-power modems and video systems. Be careful using high power or digital servos consuming a lot of current. If you use four or more of them on your airframe it is recommended to supply them separately.

	* 3.3V linear regulator		* 3.3V linear regulator

Aerovista: /* Feature additions : Tiny 2.1 vs Tiny 1.1 */

2011-08-05T08:56:09Z

Feature additions : Tiny 2.1 vs Tiny 1.1

← Older revision		Revision as of 02:56, 5 August 2011
Line 54:		Line 54:
	* 5V switching power supply		* 5V switching power supply
	::The Texas Instruments [http://focus.ti.com/docs/prod/folders/print/pth08080w.html PTH08080WAH] switching 5V/2.25A integrated power supply module greatly simplify manufacturing, reduce costs, and improve performance.		::The Texas Instruments [http://focus.ti.com/docs/prod/folders/print/pth08080w.html PTH08080WAH] switching 5V/2.25A integrated power supply module greatly simplify manufacturing, reduce costs, and improve performance.
	::Tiny v2.1 have a voltage input range of 6.1V → 18V and enough 5V power for ~~large~~ servos, high-power modems and video systems.		::Tiny v2.1 have a voltage input range of 6.1V → 18V and enough 5V power for servos, high-power modems and video systems. Be careful using large or digital servos consuming a lot of current. If you use four or more of them on your airframe it is recommended to supply them separately.

	* 3.3V linear regulator		* 3.3V linear regulator

Esden at 20:27, 10 March 2011

2011-03-10T20:27:54Z

← Older revision		Revision as of 14:27, 10 March 2011
Line 480:		Line 480:
	*[[Tunnel]]		*[[Tunnel]]
	*[[GPS_CONFIG]]		*[[GPS_CONFIG]]

			[[Category:Hardware]]

Flixr: /* Assembly */

2010-06-12T21:37:36Z

Assembly

← Older revision		Revision as of 15:37, 12 June 2010
Line 329:		Line 329:

	== Assembly ==		== Assembly ==
			Have a look at the [[Tiny_Assembly]] for assembly hints.
	===Components Layout===		===Components Layout===
	<gallery>		<gallery>

Martinwguy: fix typo "Panasoni"

2009-09-01T09:15:14Z

fix typo "Panasoni"

← Older revision		Revision as of 03:15, 1 September 2009
Line 356:		Line 356:
	\|3\|\|ERJ-3EKF1001V\|\|1K\|\|R16, R17, R23\|\|1/16W, 5%\|\|Panasonic\|\|0603\|\|\|\|P1.00KHCT-ND\|\|		\|3\|\|ERJ-3EKF1001V\|\|1K\|\|R16, R17, R23\|\|1/16W, 5%\|\|Panasonic\|\|0603\|\|\|\|P1.00KHCT-ND\|\|
	\|-		\|-
	\|3\|\|ERJ-3EKF1501V\|\|1.5K\|\|R2, R19, R20\|\|1/16W, 5%\|\|~~Panasoni~~\|\|0603\|\|\|\|P1.50KHCT-ND\|\|		\|3\|\|ERJ-3EKF1501V\|\|1.5K\|\|R2, R19, R20\|\|1/16W, 5%\|\|Panasonic\|\|0603\|\|\|\|P1.50KHCT-ND\|\|
	\|-		\|-
	\|2\|\|ERJ-3EKF1801V\|\|1.8k ''(see note1)''\|\|R13,R18\|\|1/16W, 5%\|\|Panasonic\|\|0603\|\|\|\|P1.8KHCT-ND\|\|		\|2\|\|ERJ-3EKF1801V\|\|1.8k ''(see note1)''\|\|R13,R18\|\|1/16W, 5%\|\|Panasonic\|\|0603\|\|\|\|P1.8KHCT-ND\|\|

Michel: /* Programming */

2008-06-16T07:15:39Z

Programming

← Older revision		Revision as of 01:15, 16 June 2008
Line 471:		Line 471:
	== Programming ==		== Programming ==
	[[Image:Tiny211program.jpg\|thumb\|Example wiring for programming and telemetry]]		[[Image:Tiny211program.jpg\|thumb\|Example wiring for programming and telemetry]]
	~~<p>~~The Philips LPC21xx series ARM7 microcontrollers include hardware ISP (InCircuit Serial Programming) and can be programmed through the serial interface UART0 (labled "download" on the PCB) by holding pin P0.14 (count 5 pins in from outside of PCB on download connector)~~? !!" pin P0.14 Actually Chase to count 4 pins in from outside)"!! please verify!,~~ low during power-up and until USB boot code programming is completed. Note this is a 1x operation usually done by the person supplying the ~~Tiny2.11~~ autopilot so you may want to ask if this was done from your ~~Tiny2.11~~ vendor.</p>		The Philips LPC21xx series ARM7 microcontrollers include hardware ISP (InCircuit Serial Programming) and can be programmed through the serial interface UART0 (labled "download" on the PCB) by holding pin P0.14 (count 4 pins in from outside of PCB on download connector) low during power-up and until USB boot code programming is completed. Note this is a 1x operation usually done by the person supplying the Tiny v2 autopilot so you may want to ask if this was done from your Tiny v2 vendor.<br>

	~~<p>~~Once the USB boot code is loaded (see above) the Paparazzi software includes a USB bootloader program that allows for easy 1-second programming through a standard USB port (labeled "~~usb~~" on the PCB) with only a USB to Tiny Molex 8-pin adapter cable needed. Using either the GUI (paparazzi) or command line arguments you can now upload new settings, flight plans, or software updates quickly and conveniently.~~</p>~~		Once the USB boot code is loaded (see above) the Paparazzi software includes a USB bootloader program that allows for easy 1-second programming through a standard USB port (labeled "USB" on the PCB) with only a USB to Tiny Molex 8-pin adapter cable needed. Using either the GUI (paparazzi) or command line arguments you can now upload new settings, flight plans, or software updates quickly and conveniently.

	~~<p>~~See the [[Compiling\|Compiling and Flashing]] page for more detailed instructions on installing the bootloader and autopilot software.~~</p>~~		See the [[Compiling\|Compiling and Flashing]] page for more detailed instructions on installing the bootloader and autopilot software.
	~~<p>'''~~Shortcuts~~'''</p>~~		===Shortcuts===
	*[[USB_Boot_Loader]]		*[[USB_Boot_Loader]]
	*[[Tunnel]]		*[[Tunnel]]
	*[[GPS_CONFIG]]		*[[GPS_CONFIG]]

Jszeto: /* Bill Of Material */

2008-06-16T00:40:08Z

Bill Of Material

← Older revision		Revision as of 18:40, 15 June 2008
Line 450:		Line 450:
	Note 3 :		Note 3 :
	For sales make contact with Ublox distributor in the appropriate region (http://www.u-blox.com/disti/index.html)		For sales make contact with Ublox distributor in the appropriate region (http://www.u-blox.com/disti/index.html)
			Remark: u-blox are strictly controlling their GPS Chips right now, for some reason! They will refer you to get one on their website, which is $99.

	== PCB and assembled boards suppliers ==		== PCB and assembled boards suppliers ==

Jszeto: /* Programming */

2008-06-16T00:34:14Z

Programming

← Older revision		Revision as of 18:34, 15 June 2008
Line 471:		Line 471:
	== Programming ==		== Programming ==
	[[Image:Tiny211program.jpg\|thumb\|Example wiring for programming and telemetry]]		[[Image:Tiny211program.jpg\|thumb\|Example wiring for programming and telemetry]]
	<p>The Philips LPC21xx series ARM7 microcontrollers include hardware ISP (InCircuit Serial Programming) and can be programmed through the serial interface UART0 (labled "download" on the PCB) by holding pin P0.14 (count 5 pins in from outside of PCB on download connector) low during power-up and until USB boot code programming is completed. Note this is a 1x operation usually done by the person supplying the Tiny2.11 autopilot so you may want to ask if this was done from your Tiny2.11 vendor.</p>		<p>The Philips LPC21xx series ARM7 microcontrollers include hardware ISP (InCircuit Serial Programming) and can be programmed through the serial interface UART0 (labled "download" on the PCB) by holding pin P0.14 (count 5 pins in from outside of PCB on download connector)? !!" pin P0.14 Actually Chase to count 4 pins in from outside)"!! please verify!, low during power-up and until USB boot code programming is completed. Note this is a 1x operation usually done by the person supplying the Tiny2.11 autopilot so you may want to ask if this was done from your Tiny2.11 vendor.</p>

	<p>Once the USB boot code is loaded (see above) the Paparazzi software includes a USB bootloader program that allows for easy 1-second programming through a standard USB port (labeled "usb" on the PCB) with only a USB to Tiny Molex 8-pin adapter cable needed. Using either the GUI (paparazzi) or command line arguments you can now upload new settings, flight plans, or software updates quickly and conveniently.</p>		<p>Once the USB boot code is loaded (see above) the Paparazzi software includes a USB bootloader program that allows for easy 1-second programming through a standard USB port (labeled "usb" on the PCB) with only a USB to Tiny Molex 8-pin adapter cable needed. Using either the GUI (paparazzi) or command line arguments you can now upload new settings, flight plans, or software updates quickly and conveniently.</p>

Michel at 22:01, 15 June 2008

2008-06-15T22:01:51Z

← Older revision		Revision as of 16:01, 15 June 2008
Line 26:		Line 26:
	* 1 x USB (client)		* 1 x USB (client)
	* Integrated GPS receiver and patch antenna (4Hz update)		* Integrated GPS receiver and patch antenna (4Hz update)
	* 5V/2.25A switching power supply & 3.3V/1A linear regulator		* 5v / 2.25A switching power supply (input voltage range 6.1v → 18v)
			* 3.3v / 1A linear regulator
	* 3 x status LEDs with attached test point		* 3 x status LEDs with attached test point
	* 24 grams (with LEA-4P GPS and 18mm GPS antenna)		* 24 grams (with LEA-4P GPS and 18mm GPS antenna)
Line 403:		Line 404:
	\|colspan="10" align="left"\|''Modules''		\|colspan="10" align="left"\|''Modules''
	\|-		\|-
	\|1\|\|PTH08080WAH\|\|PTH_08080W\|\|IC1\|\|~~2.25A~~ Wide-input adjustable switching regulator\|\|Texas Instr.\|\|specific\|\|\|\|296-20432-ND\|\|		\|1\|\|PTH08080WAH\|\|PTH_08080W\|\|IC1\|\|Wide-input adjustable switching regulator\|\|Texas Instr.\|\|specific\|\|\|\|296-20432-ND\|\|
	\|-		\|-
	\|1\|\|LEA-4P-0-000-0 \|\|LEA_4P\|\|IC2\|\|\|\|ublox\|\|specific\|\|\|\|''N/A''\|\|(u-blox.com, ''see note 3'')		\|1\|\|LEA-4P-0-000-0 \|\|LEA_4P\|\|IC2\|\|GPS receiver\|\|ublox\|\|specific\|\|\|\|''N/A''\|\|(u-blox.com, ''see note 3'')
	\|- style="background:WhiteSmoke; color:black"		\|- style="background:WhiteSmoke; color:black"
	\|colspan="10" align="left"\|''Connectors''		\|colspan="10" align="left"\|''Connectors''