User/LisaM

From PaparazziUAV
Revision as of 10:34, 7 June 2011 by Openuas (talk | contribs) (User/LisaM moved to LisaM: Clean up of documentation pages)
Jump to navigation Jump to search
Lisa/M V1.0 top view
Lisa/M V1.0 bottom view
Lisa/M V1.0 top view
Lisa/M V1.0 bottom view

General description

Mechanical drawing

LisaM V1 0 top mechanical.png

Connector legend

LisaM V1 0 top labeled.png

Satellite 2.4 GHZ Receiver connection

Lisa M V1 0 satellite receiver connection labeled.png

Power supply jumpers

LisaM V1 0 top jumpers and leds.pngLisaM V1 0 bottom jumpers.png

It is possible to reconfigure the electrical system on Lisa/M using the supply jumpers.

  • JP1 connects the servo power rail to V_IN rail.
  • JP2 connects the battery rail (used by default only for battery voltage measurement) to the V_IN rail.
  • JP3 bypasses the +5V voltage regulator and connects V_IN to the +5V rail.
  • JP4 connects the +5V rail to the VCC pin on the UART2 connector.
  • JP5 connects the +3V3 rail to the VCC pin on the UART2 connector.
  • JP6 connects the +5V rail to the VCC pin on the UART1 connector.
  • JP7 connects the +3V3 rail to the VCC pin on the UART1 connector.
Retrieved from "http://wiki.paparazziuav.org/w/index.php?title=User/LisaM&oldid=9508"