Difference between revisions of "User/LisaL"
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
* Connect a mini USB cable in the mini USB connector. This should give you two USB devices. The first one ( usualy /dev/ttyUSB0) is the console for the Overo, the second one is the JTAG for the STM32 | * Connect a mini USB cable in the mini USB connector. This should give you two USB devices. The first one ( usualy /dev/ttyUSB0) is the console for the Overo, the second one is the JTAG for the STM32 | ||
* | * | ||
=Use case #1: the "classic" paparazzi fixed wing code running in the STM32 only= | |||
=Use case #2: the paparazzi Booz quadrotor code running in the STM32 only= | |||
=Use case #3: coming soon= | |||
Revision as of 07:09, 6 August 2010
This page describe how to use Lisa/L from a user point of view
Getting started
- Connect power to the board. The board accepts input voltage from 6V to 18V. The power connector is from JST and known in the rc world as a BEC connector
- Connect a mini USB cable in the mini USB connector. This should give you two USB devices. The first one ( usualy /dev/ttyUSB0) is the console for the Overo, the second one is the JTAG for the STM32