Difference between revisions of "User/LisaL"

From PaparazziUAV
Jump to navigation Jump to search
(Redirecting to Lisa/L)
 
(25 intermediate revisions by 9 users not shown)
Line 1: Line 1:
This page describe how to use Lisa/L from a user point of view
#REDIRECT [[Lisa/L]]
 
=Getting started=
 
* Install Gnu/Linux Ubuntu lucid lynx ( 10.04) and the paparazzi-dev and paparazzi-stm32 packages ( Installation from the Command Line: om this page [[Installation]] ).
sudo apt-get update
sudo apt-get install paparazzi-dev  paparazzi-stm32
* Connect power to the board. The board accepts input voltage from 6V to 18V. The power connector is from JST and known in the rc world as a BEC connector
* Connect a mini USB cable in the mini USB connector. This should give you two USB devices. The first one ( usualy /dev/ttyUSB0) is the console for the Overo, the second one is the JTAG for the STM32
* Flash a test program in the stm32 :
  make AIRCRAFT=BOOZ2_A7 test_baro.upload
 
=== Overo ===
* The main documentation page for the overo on gumstix website is [http://www.gumstix.net/Setup-and-Programming/cat/Overo-Setup-and-Programming/111.html here].
* We now have a Overo toolchain package ! install the paparazzi-omap package. If you feel it's too easy, you can look at [http://paparazzi.enac.fr/wiki/LisaOveroImage here] and enjoy the fun of compiling openembedded yourself
* In order to use the SPI link between the STM32 and the Overo, you'll need a patched linux kernel and a couple of libraries. Look in the developer section if you wanna know the gore details of it. If not, just download our pre-compiled filesystem image and kernel from [http://paparazzi.enac.fr/overo/ here] and follow the instruction from [http://www.gumstix.net/Setup-and-Programming/view/Overo-Setup-and-Programming/Creating-a-bootable-microSD-card/111.html here] to write them on a micro sd card.
* Flash the STM32 with the link test program
  make AIRCRAFT=BOOZ2_A8 stm_test_spi_link.upload
* Compile and upload the Overo test program ( assuming you already have the overo toolchain and network... mmmm... more about that soon...)
  make AIRCRAFT=BOOZ2_A6 overo_test_spi_link.upload
* Log on your Overo and run it
 
=Use case #1: the fixedwing firmware running in the STM32 only=
 
Coming soon... look for airframes/AirborneCodeReorg/LisaFw.xml
 
=Use case #2: the rotorcraft firmware running in the STM32 only=
 
Use the airframes/Poine/booz2_a7 as an example. You may only have to change some subsystems type to match your peripherals.
 
    make AIRCRAFT=BOOZ2_A7 ap.upload
 
=Use case #3: the lisa_passthrough firmware=
 
This firmware turns the STM32 into a simple io processor that sends sensors and radio control to the Overo and fetches actuators position in return.
 
The overo_test_passthrough target demonstrates the use of the Paparazzi framework on the Overo: communications with the stm32, accurate periodic events and telemetry/datalink over anetwork link like wifi.

Latest revision as of 10:02, 10 December 2011

Redirect to:

Retrieved from "http://wiki.paparazziuav.org/w/index.php?title=User/LisaL&oldid=10953"