From PaparazziUAV
Revision as of 18:24, 20 April 2008 by Dconger (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Required Cables:

  1. USB cable
  2. USB to 8-pin Molex Picoblade connector adapter cable


  1. Connect USB Cable + 8-pin Molex adapter to USB on your laptop
  2. Connect 8-pin Molex Connector on the Adapter cable to "usb" on Tiny2.11
  3. Power on Tiny2.11
  4. Enter this command in a terminal: make upload_bl PROC=GENERIC

Success will show this in the last lines of the terminal window

Found USB device
BootROM code: 2.12
Part ID: 0x0402FF25 (LPC2148, 512k Flash, 32k+8k RAM)
BootLoader version: 1.3
Starting software at 0x00004000