Difference between revisions of "Tools"
(imax b6 charger) |
|||
| Line 1: | Line 1: | ||
= Logic Analyzer = | = Saleae Logic Analyzer = | ||
[[Image:Logic_Analyzer.jpg|thumb|right]] | [[Image:Logic_Analyzer.jpg|thumb|right]] | ||
| Line 13: | Line 13: | ||
There is also an open source support for a lot of different logic analyzers (china clones) [http://sigrok.org/wiki/Main_Page sigrok] | There is also an open source support for a lot of different logic analyzers (china clones) [http://sigrok.org/wiki/Main_Page sigrok] | ||
= iMax B6 and similar = | = iMax B6 charger and similar = | ||
There are various variants of this charger available (dual/quad output, 12 or 230V input, 200W version ...).<br/> | There are various variants of this charger available (dual/quad output, 12 or 230V input, 200W version ...).<br/> | ||
And also some clones, be aware, most clones are not calibrated -> poor balanced cells and overloading can happen ! | And also some clones, be aware, most clones are not calibrated -> poor balanced cells and overloading can happen ! | ||
Revision as of 16:00, 24 December 2013
Saleae Logic Analyzer
Helpful to analyze/debug data streams or measure ppm signal length.
saleae (works with linux)
The original costs about 120€, china clones begin at 10€.
The Seleae software for windows only allows their original hardware by setting the VID (Vendor ID) and PID (Product ID) in the saleae.inf file. This file is required as driver for the harware.
There is also an open source support for a lot of different logic analyzers (china clones) sigrok
iMax B6 charger and similar
There are various variants of this charger available (dual/quad output, 12 or 230V input, 200W version ...).
And also some clones, be aware, most clones are not calibrated -> poor balanced cells and overloading can happen !
An open source replacement firmware is available github.com/stawel/cheali-charger.
This allows calibration unlike the stock firmware.